User manual CRESTON CLS-C6

[. . . ] Crestron CLS/CLSI-C6 & CLS/CLSI-C6M ILux® Lighting System Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Regulatory Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. As of the date of manufacture, the CLS/CLSI-C6/C6M has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. [. . . ] Firmware upgrades are available from the Crestron Web site as new features are developed after product releases. One has the option to upload programs and projects via the programming software or to upload and upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help file or the Crestron Toolbox help file. SIMPL Windows Firmware If a SIMPL Windows program is provided, it can be uploaded to the control system using SIMPL Windows or Crestron Toolbox. Check the Crestron Web site to find the latest firmware. (New users may be required to register to obtain access to certain areas of the site, including the FTP site. ) Upgrade CLS-C6 firmware via Crestron Toolbox. · · Establish communication with the CLS-C6 and display the "System Info" window. to upgrade the CLS-C6 firmware. Program Checks Actions that can be performed on the CLS-C6 vary depending on whether it is connected via Cresnet or Ethernet. For Cresnet connections, using Crestron Toolbox, display the network device tree (Tools | Network Device Tree) to show all network devices connected to the control system. Right-click on the CLS-C6 to display actions that can be performed on the CLS-C6. Operations Guide - DOC. 6347C iLux® Integrated Lighting System: CLS/CLSI-C6/C6M · 31 ILux® Integrated Lighting System Crestron CLS/CLSI-C6/C6M Operation The iLux always operates in one of four modes. The Setup mode is used to redefine many of the CLS-C6RF settings. Details regarding the Setup mode are given in "Setup Mode" on page 14. The following sections provide detailed descriptions of the Standard, Lights, and Shades modes. It is important to have a good understanding of these operating modes before attempting to take advantage of the extensive features available through the CLS-C6RF. (Refer also to "Appendix D: Button Functions" on page 54 for details on button functions. ) Standard Mode Standard mode is the default mode; buttons are typically used to recall scenes, although they can be redefined to serve other functions. · By default, the six function buttons across the front panel are simple scene recall buttons. The buttons can be reprogrammed in Setup mode, or via the iLux Designer program, to perform different actions. The ON button function always recalls the "On" scene. The typical On scene is all lights at 100%; however, other value can be set just like any other scene. The OFF button function always recalls the "Off" scene. The "Off" scene always sets all lights to 0%; however, fade time and shade motor behavior are programmable. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee plus shipping costs on any products returned with an RMA. [. . . ]