User manual CRESTON CLW-EXPEX

[. . . ] This device may not cause interference, and 2. This device may accept any interference, including interference that may cause undesired operation of the device. To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20 centimeters from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. All brand names, product names and trademarks are the property of their respective owners. ©2010 Crestron Electronics, Inc. Regulatory Compliance Description The CLW-EXPEX is a 2-way RF wireless expander designed to extend the range of remotes in an infiNET EXTM network. [. . . ] Take the CEN-RFGW-EX out of the Acquire mode after all devices have been acquired by either pressing the ACQUIRE button on the CEN-RFGW-EX or using Crestron Toolbox. For details, refer to the latest version of the CEN-RFGW-EX Operations & Installation Guide (Doc. NOTE: To leave a gateway, place the device in the Acquire mode when there is no gateway in the Acquire mode. To check the communication status of the CLW-EXPEX, perform the tap-tap-tap-hold (step 2 above), but release the button after approximately two seconds. At this point, the button will indicate communication status as described below. Turns On Blinks 3 Times Blinks 2 Times Blinks 1 Time Stays Off Device communicating with control system. Device communicating with gateway, but gateway not communicating with control system. Device acquired but not communicating with network. Device not joined to network. Joining an infiNET EX Network 4. Troubleshooting TROUBLE The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. Button blinks continuously after trying to acquire. Acquire process failed due to Move closer to gateway or being out of range from other acquired infiNET EX gateway or other aquired device. Place gateway in Acquire Gateway is not in Acquire mode and retry. mode. PROBABLE CAUSE(S) CORRECTIVE ACTION Unit does not extend Unit is not acquired. RF range. Acquire CLW-EXPEX unit to gateway. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (www. crestron. com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number. DOCUMENT TITLE CEN-RFGW-EX infiNET EXTM Gateway Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. You can also log onto the online help section of the Crestron website (www. crestron. com/onlinehelp) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. Future Updates As Crestron improves functions, adds new features and extends the capabilities of the CLW-EXPEX, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron website periodically for manual update availability and its relevance. Updates are identified as an "Addendum" in the Download column. Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. [. . . ] Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty. Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties. [. . . ]