User manual CRESTON DM-MD8X8

[. . . ] Crestron DM-MD8X8/16X16/32X32 DigitalMediaTM Switchers Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Important Safety Instructions · · · · · · · · · Read these instructions. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Loopback Settings Press the MENU button to return to the list of options for the input card. The DMC-CAT can display information about the device connected to the HDMI OUT port as well as information about the signal passed to the HDMI OUT port on the DMC-CAT. Available information includes deep color setting, audio details and EDID information. Turn the selection knob to highlight Loopback Settings and press the ENTER button. Loopback Settings Loopback Settings HDCP State: Inactive Allow Deep Color: On Deep Color Mode: Off 2. Turn the selection knob to view available information, enable/disable deep color, view audio details, or view EDID information. The loopback output can be set to enable or disable the deep color feature of the carried video signal. Turn the selection knob to highlight Allow Deep Color and press the ENTER button. Operations Guide ­ DOC. 6755C DigitalMediaTM Switchers: DM-MD8X8/16X16/32X32 · 93 DigitalMediaTM Switchers Crestron DM-MD8X8/16X16/32X32 Allow Deep Color Mode Allow Deep Color Mode * Off On ii. The current selection is indicated with an asterisk (*). Turn the selection knob to highlight Off or On and press the ENTER button. Turn the selection knob to highlight Audio and press the ENTER button. Audio Details Audio Format: PCM Frequency: 48. 0kHz Channels: 2 ii. Press the MENU button to return to the Loopback Settings. To view EDID information about the display device connected to the HDMI OUT port: i. Turn the selection knob to highlight EDID Information and press the ENTER button. 94 · DigitalMediaTM Switchers: DM-MD8X8/16X16/32X32 Operations Guide ­ DOC. 6755C Crestron DM-MD8X8/16X16/32X32 EDID Information DigitalMediaTM Switchers EDID Information Manufacturer: SHP Name: SHARP HDMI Timing: 1920x1080 @ 60Hz ii. Press the MENU button to return to the Loopback Settings. Audio Output Level Press the MENU button to return to the list of options for the input card. The output level of the audio signal can be adjusted. Turn the selection knob to highlight Audio Output Level and press the ENTER button. Audio Output Level Audio Output Level -52 dB 2. DM Cable Type Turn the selection knob to adjust the audio output level. Press the MENU button to return to the list of options for the input card. The card can be configured to use specifc types of cables for the DM input signal. Turn the selection knob to highlight DM Cable Type and press the ENTER button. The selected cable type is displayed with an asterisk (*). Operations Guide ­ DOC. 6755C DigitalMediaTM Switchers: DM-MD8X8/16X16/32X32 · 95 DigitalMediaTM Switchers DM Cable Type Crestron DM-MD8X8/16X16/32X32 DM Cable Type * Digital Media Category 6 Category 5e 2. To select a different cable type, turn the selection knob to highlight the cable type to be used and press the ENTER button. An asterisk will appear next to the selected cable type. [. . . ] If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. [. . . ]