User manual CRESTON P-EXPEX QUICK GUIDE

[. . . ] P-EXPEX quickstart guide 1 Introduction ® Prodigy® Wireless Expander 4 Acquire the P-EXPEX Use the Prodigy Composer software (available for download from www. crestron. com/prodigycomposer) to configure your Prodigy system. A Prodigy Network Setup Wizard is included with Prodigy Composer. [. . . ] Tap the button on the P-EXPEX three times in rapid succession then press and hold until the button blinks (may take up to 10 seconds). 5 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TROUBLE Button blinks continuously after trying to acquire. The Prodigy P-EXPEX is a 2-way RF wireless expander designed to extend the range of wireless Prodigy products (including the PTX3 and Prodigy wireless devices whose model name ends in "EX"). It plugs into a standard 3-prong outlet. 2 PROBABLE CAUSE(S) CORRECTIVE ACTION Application The following diagram illustrates a P-EXPEX in a system with other Prodigy devices. Acquire process failed due to Move closer to PMC2 or other being out of range from acquired wireless device. PMC2 or other acquired wireless devices. Acquire P-EXPEX unit to PMC2. P-EXPEX does not extend RF range. Button Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. You can also log onto the online help section of the Crestron website (www. crestron. com/onlinehelp) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. Future Updates As Crestron improves functions, adds new features and extends the capabilities of the P-EXPEX, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. 3. 4. Release the button. [. . . ] At this point, the button will indicate communication status as described below. P-EXPEX BUTTON BEHAVIOR Turns on Blinks two times Blinks one time Stays off COMMUNICATION STATUS Device communicating with control system Device not communicating with PMC2 Device acquired but not communicating with network Device not joined to network For Regulatory Compliance information, refer to the latest version of Doc. 6925A (2026392) 05. 10 www. crestron. com/prodigy ©2010 Specifications subject to change without notice. 888. 273. 7876 201. 767. 3400 All brand names, product names, and trademarks are the property of their respective owners. [. . . ]