User manual CRESTON SWAMP-24X8 11-10

[. . . ] Crestron SWAMP(I)-24X8 SonnexTM Multiroom Audio System Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Important Safety Instructions · · · · · · · · · Read these instructions. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] The Loudness controls will be displayed. Loudness Controls ­ Select Zone 3. Press the or buttons to display the zone to be controlled and press ENTER. The Loudness setting will be displayed. Loudness Setting 4. 2. Press the or buttons to display the setting to be applied and press ENTER. The display will return to the Loudness controls. Press MENU to return to the Zone Setup menu. Enter the Zone Setup menu as described in "Enter/Exit Zone Setup Menu" on page 27. Press the or buttons to display Balance and press ENTER. The Balance controls will be displayed. Balance Controls ­ Select Zone To set a zone's balance setting: 3. Press the or buttons to display the zone to be controlled and press ENTER. The Balance setting will be displayed. Balance Setting 4. 6. Press the or buttons to display the setting to be applied and press ENTER. The display will return to the Balance controls. Press MENU to return to the Zone Setup menu. Operations Guide ­ DOC. 7049A SonnexTM Multiroom Audio System: SWAMP(I)-24X8 · 29 SonnexTM Multiroom Audio System Crestron SWAMP(I)-24X8 Set Mono/Stereo To set a zone's mono/stereo setting: 1. Enter the Zone Setup menu as described in "Enter/Exit Zone Setup Menu" on page 27. Press the or buttons to display Mono and press ENTER. The Mono controls will be displayed. Mono Controls ­ Select Zone 3. Press the or buttons to display the zone to be controlled and press ENTER. The Mono/Stereo setting will be displayed. Mono/Stereo Setting 4. 2. Press the or buttons to display the setting to be applied and press ENTER. The display will return to the Mono controls. Press MENU to return to the Zone Setup menu. Enter the Zone Setup menu as described in "Enter/Exit Zone Setup Menu" on page 27. Press the or buttons to display Minimum Volume and press ENTER. [. . . ] Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number and return address. Products may be returned for credit, exchange or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]