User manual CRESTRON AES

[. . . ] Crestron AdagioTM AES Entertainment System Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Important Safety Instructions · · · · · · · · Read these instructions. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] · · Access the Room Setup mode as described on page 30. Press the soft button labeled MaxV to open the Maximum Volume control. Operations Guide ­ DOC. 6456A Entertainment System: Adagio AES · 31 Entertainment System Crestron AdagioTM AES Maximum Volume Control SOURCE ROOM HOUSE MENU Room 3 Max Volume 70% Reset BKLT SCHED DISPLAY MORE · Adjust the maximum volume with the selection knob. Turn clockwise to raise the maximum volume or counterclockwise to lower the maximum volume. The lowest maximum volume setting is 70%. Press the soft button labeled Reset to set the volume level to 100%. NOTE: Other rooms can be adjusted by pressing a different room button. · Adjust the Startup Volume Press MENU to return to the Room Setup menu. The startup volume establishes the volume level setting for a room when a room is turned on. The startup volume settings of each room can be adjusted independently. · · Access the Room Setup mode as described on page 30. Press the soft button labeled StartV to open the Startup Volume control. Startup Volume Control SOURCE ROOM HOUSE MENU Room 3 Startup Volume 50% Reset BKLT SCHED DISPLAY MORE · Adjust the startup volume with the selection knob. Turn clockwise to raise the startup volume or counterclockwise to lower the startup volume. The maximum startup volume setting is 50%. Press the soft button labeled Reset to set the volume level to 30%. NOTE: Other rooms can be adjusted by pressing a different room button. · Set Mono or Stereo Mode Press MENU to return to the Room Setup menu. The audio sent to the speakers in each room can be set for either stereo or mono. When set to stereo, the audio signal is separated into left and right channels for distribution to left and right speakers. When set to mono, the audio signal is combined into one signal for use in larger rooms where stereo separation is not practical. The mono/stereo settings of each room can be adjusted independently. · Access the Room Setup mode as described on page 30. Operations Guide ­ DOC. 6456A 32 · Entertainment System: Adagio AES Crestron AdagioTM AES Entertainment System · Press the soft button labeled Mono to open the Stereo/Mono control. Stereo/Mono Control SOURCE ROOM HOUSE MENU Room 3 Stereo/Mono Stereo Mono BKLT SCHED DISPLAY MORE · The selected mode is underlined on the lower-right side of the LCD. Press the soft button labeled Stereo to select the stereo mode. Press the soft button labeled Mono to select the mono mode. NOTE: Other rooms can be adjusted by pressing a different room button. · Press MENU to return to the Room Setup menu. Operations Guide ­ DOC. [. . . ] Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. [. . . ]