User manual CRESTRON C2N-ANLZ

[. . . ] Crestron C2N-ANLZ Cresnet® Analyzer Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc. Crestron C2N-ANLZ Cresnet® Analyzer Contents Cresnet® Analyzer: C2N-ANLZ 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press either of the MARKER buttons to place a marker in the log. Pressing the MARKER 1 button will place the text "MARK 1" in the log file. Pressing the MARKER 2 button will place the text "MARK 2" in the log file. When a marker button is pressed, its corresponding LED will light. To stop logging data, press the LOG button. The LOG LED will light and then turn off. If text console communications are established with the C2N-ANLZ, a message will be displayed indicating the end time of the log in addition to file size information. · Once data has been logged, remove the memory card and use the included USB card reader to email the log file(s) to Crestron for analysis. Console Operation Use the C2N-ANLZ console commands to perform many of the functions available from the buttons on the C2N-ANLZ as well as retrieve information about the C2N-ANLZ and the log files stored on the memory card. Format a Memory Card Formatting a memory card will erase any files that are stored on the card. To format a memory card: · · · Establish communications with the C2N-ANLZ and open a text console window as described on page 9. Install the memory card as described on page 8. Type the FORMAT command and press the Enter key. The status of the format process will be displayed. Log Data to a Memory Card Logged data is written to a text file on the memory card. To log Cresnet data to a memory card: · · · Establish communications with the C2N-ANLZ and open a text console window as described on page 9. Install the memory card as described on page 8. To start logging data, type the LOG command and press the Enter key. The LOG LED will light and then start blinking. A message will be displayed indicating the start time of the log. To stop logging data, type the -LOG command and press the Enter key. The LOG LED will light and then turn off. A message will be displayed indicating the end time of the log in addition to file size information. · Operations Guide ­ DOC. 6473 Cresnet® Analyzer: C2N-ANLZ · 11 Cresnet® Analyzer Crestron C2N-ANLZ Mark Events in the Log When troubleshooting, events can be marked in the log for future analysis. When the engineer reviews the log, he/she can search the log for the marker to locate the instance that requires the engineer's analysis. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]