User manual CRESTRON C2N-IIF

[. . . ] Crestron C2N-IIF Intercom Interface Operations & Installation Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc. Crestron C2N-IIF Intercom Interface Contents Intercom Interface: C2N-IIF 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Industry Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Network Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Hardware Hookup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Identity Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Programming Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Earliest Version Software Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Programming with SIMPL Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Programming with VisionToolsTM Pro-e. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Uploading and Upgrading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Communication Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Uploading a SIMPL Windows Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Uploading a VT Pro-e Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Problem Solving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Further Inquiries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Future Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Return and Warranty Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Merchandise Returns / Repair Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 CRESTRON Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Operations & Installation Guide - DOC. 6235 Contents · i Crestron C2N-IIF Intercom Interface Intercom Interface: C2N-IIF Introduction Features and Functions The Crestron® Intercom Interface (C2N-IIF) is an interface module designed to integrate an intercom door station with a Crestron facility control system. [. . . ] C2Net Device, Slot 9 26 · Intercom Interface: C2N-IIF Operations & Installation Guide - DOC. 6235 Crestron C2N-IIF Setting the Net ID in Device Settings Intercom Interface Double-click the C2N-IIF icon to open the "Device Settings" window. This window displays the C2N-IIF device information. If necessary, select the Net ID tab to change the Net ID, as shown in the following figure. "Device Settings" Window for the C2N-IIF NOTE: SIMPL Windows automatically changes Net ID values of a device added to a program if a duplicate device or a device with the same default Net ID already exists in the program. Always ensure that the hardware and software settings of the Net ID match. For Net ID hardware settings details, refer to "Identity Code" on page 20. C2N-IIF Symbol in Programming Manager Programming Manager is where programmers "program" a Crestron control system by assigning signals to symbols. The following describes the C2N-IIF symbol in the SIMPL Windows Programming Manager. Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF · 27 Intercom Interface Crestron C2N-IIF C2N-IIF Symbol in SIMPL Windows Programming Manager NOTE: The symbol image has been altered to fit the page. 28 · Intercom Interface: C2N-IIF Operations & Installation Guide - DOC. 6235 Crestron C2N-IIF Intercom Interface The following tables list the symbol's input and output signals, respectively, and their functional descriptions. C2N-IIF Digital Input Signal Descriptions INPUT Output1_On/Off through Output8_On/Off DESCRIPTION When high, the respective switched output will close. In Essex and Discrete mode, all eight outputs are available. In Matrix mode, only outputs 1 through 4 are available, while outputs 5 through 8 are reserved to enable four-by-four matrix switching. When high, all audio signals to the speaker are muted for as long as the signal remains high. When high, the Essex keypad (if installed) backlight is activated for as long as the signal remains high (Essex mode only). Enables audio to be routed from the line level source to the speaker output, for as long as the signal remains high. When signal pulses high, currently playing WAV file will stop. When signal pulses high, the WAV file (digital joins 13 through 42 respectively) will play. Refer to "Sound Manager Guidelines" on page 35 for information on digital joins. MuteAudio EssexBacklight AudioOutputEn CancelWAV PlayWAV1 through PlayWAV30 C2N-IIF Analog Input Signal Descriptions INPUT Audio_Vol Audio_Treble Audio_Bass WAV_Vol WAV_Treble WAV_Bass IO_Mode_Select DESCRIPTION Adjusts audio volume from 0 to 100%. Adjusts audio treble ± 14 dB in 2 dB steps. Adjusts audio bass ± 14 dB in 2 dB steps. [. . . ] Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. [. . . ]