User manual CRESTRON C2N-MMS-SC

[. . . ] Crestron C2N-MMS-SC Scan Converter Card for C2N-MMS Operations & Installation Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc. Crestron C2N-MMS-SC Scan Converter Card for C2N-MMS Contents Scan Converter Card for C2N-MMS: C2N-MMS-SC Introduction Features and Functions Specifications Physical Description Industry Compliance Installation and Hookup Setup Programming Software Programming with SIMPL Windows Programming with VisionToolsTM Pro-e Problem Solving Troubleshooting Further Inquiries Future Updates Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty 1 1 1 2 4 5 5 8 8 9 16 16 16 17 17 18 18 18 Operations & Installation Guide - DOC. 6138 Contents · i Crestron C2N-MMS-SC Scan Converter Card for C2N-MMS Scan Converter Card for C2N-MMS: C2N-MMS-SC Introduction Features and Functions The C2N-MMS-SC scan converter card is designed for Crestron's C2NMMS professional multimedia switch. [. . . ] 6138 Scan Converter Card for C2N-MMS: C2N-MMS-SC · 9 Scan Converter Card for C2N-MMS Expanded MP2E System Tree Crestron C2N-MMS-SC C2Net-Device Slot in Configuration Manager To incorporate the C2N-MMS (with C2N-MMS-SC) into the system, drag the C2N-MMS w/C2N-MMS-SC Scan Converter from the Cresnet Control Modules | Cresnet Video Modules folder of the Device Library and drop it in the System Views. The MP2E system tree displays the device in slot 1 with a default NET ID of 11 as shown in the following illustration. NOTE: The first C2N-MMS in a system is preset with a NET ID of 11, when its symbol is dragged into the upper pane of System Views. Additional C2N-MMS devices (with or without the C2N-MMS-SC) are assigned different NET ID numbers as they are added. C2Net Device, Slot 1 10 · Scan Converter Card for C2N-MMS: C2N-MMS-SC Operations & Installation Guide - DOC. 6138 Crestron C2N-MMS-SC Scan Converter Card for C2N-MMS Setting the Net ID in Device Settings Double-click the C2N-MMS w/C2N-MMS-SC icon to open the "Device Settings" window. This window displays the C2N-MMS device information. If necessary, select the Net ID tab to change the Net ID, as shown in the following figure. "Device Settings" Window for the C2N-MMS w/C2N-MMS-SC NOTE: SIMPL Windows automatically changes NET ID values of a device added to a program if a duplicate device or a device with the same default NET ID already exists in the program. Always ensure that the hardware and software settings of the NET ID match. For NET ID hardware settings details, refer to the latest revision C2N-MMS Operations Guide (Doc. C2N-MMS Symbol in Programming Manager Programming Manager is where programmers "program" a Creston control system by assigning signals to symbols. Turns on EQ2 level signal compensation on RGB Output 1. Turns on 3 dB signal boost on RGB Output 1. Turns on EQ1 level signal compensation on RGB Output 2. Turns on EQ2 level signal compensation on RGB Output 2. Turns on 3 dB signal boost on RGB Output 2. When high, sends scan converter output in PAL format. Sends scan converter output as composite video signal. Sends a test pattern through scan converter output. This will override scan converter output. * Information on Cable-EQ & Boost signals can be found in the latest revision of the C2N-MMS Professional Multimedia Switch Installation Guide (Doc. 6132). NOTE: Different combinations of signal compensation and boosting are recommended for different lengths of RGB Cable. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. [. . . ]