User manual CRESTRON CEN-IDOC

[. . . ] Crestron CEN-IDOC Interface for Apple® iPod® Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc. Crestron CEN-IDOC Interface for Apple® iPod® Contents Interface for Apple® iPod®: CEN-IDOC 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For instructions, refer to the latest revision of the AES guide (Doc. 6458). 10 Interface for Apple iPod: CEN-IDOC Operations Guide ­ DOC. 6404A Crestron CEN-IDOC Interface for Apple® iPod® Programming Software Have a question or comment about Crestron software?Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron's True Blue Support, log in at http://support. crestron. com. First-time users will need to establish a user account. Earliest Version Software Requirements for the PC NOTE: Crestron recommends that you use the latest software to take advantage of the most recently released features. The latest software is available from the Crestron website. Crestron has developed an assortment of Windows-based software tools to develop a Crestron control system. The following are the minimum recommended software versions for the PC: Software TASK Program control system to operate CEN-IDOC. REQUIRED SOFTWARE VERSION SIMPL Windows version 2. 06. 20 or later with SIMPL+ Cross Compiler version 1. 1 or later and Library update 372 or later; Also requires Crestron Database version 18. 0. 0 or later. Crestron SystemBuilderTM version 3. 0 (expected July 2006) or later with SystemBuilder Templates version 3. 0 or later. Refer to software release notes or Crestron website for other required Crestron software packages. Upload program and firmware. Program with simple wizards for systems using a CEN-IDOC (optional but recommended). Programming with Crestron SystemBuilder Crestron SystemBuilder is the easiest method of programming, but does not offer as much flexibility as SIMPL Windows. For additional details, download SystemBuilder from the Crestron website and examine the extensive help file. Programming with SIMPL Windows NOTE: While SIMPL Windows can be used to program the CEN-IDOC, it is recommended to use SystemBuilder for configuring system. SIMPL Windows is Crestron's premier software for programming Crestron control systems. It is organized into two separate, but equally important "Managers". Configuration Manager Configuration Manager is the view where programmers "build" a Crestron control system by selecting hardware from the Device Library. Operations Guide ­ DOC. 6404A Interface for Apple iPod: CEN-IDOC · 11 Interface for Apple® iPod® · Crestron CEN-IDOC To incorporate the CEN-IDOC into the system, drag the CEN-IDOC from the Ethernet Control Modules | Ethernet Audio Modules folder of the Device Library and drop it in the System Views. Locating the CEN-IDOC in the Device Library · The system tree of the control system displays the device in the appropriate slot with a default IP ID as shown in the following illustration. C2ENET-1 Device, Slot 5 · · Additional CEN-IDOC devices are assigned different IP ID numbers as they are added. If necessary, double click a device to open the "Device Settings" window and change the IP ID, as shown in the following figure. "CEN-IDOC Device Settings" Window · Programming Manager The IP ID specified in the SIMPL Windows program must match the or IP ID of each unit. Programming Manager is the view where programmers "program" a Crestron control system by assigning signals to symbols. The symbol can be viewed by double Operations Guide ­ DOC. 6404A 12 Interface for Apple iPod: CEN-IDOC Crestron CEN-IDOC Interface for Apple® iPod® clicking on the icon or dragging it into Detail View. A description for each signal in the symbol is described in the SIMPL Windows help file (F1). Example Program An example program for the CEN-IDOC is available from the Crestron website (http://www. crestron. com/exampleprograms). Operations Guide ­ DOC. 6404A Interface for Apple iPod: CEN-IDOC · 13 Interface for Apple® iPod® Crestron CEN-IDOC Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. [. . . ] CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. [. . . ]