User manual CRESTRON CLW-DIM1RF 4RF DIMS1RF 4RF SLVD1RF

[. . . ] Crestron CLW-DIM1/4RF, CLW-DIMS1/4RF, CLW-SLVD1RF infiNETTM Dimmers Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. Windows® and Windows® XP are registered trademarks of Microsoft Corporation in the United States and other countries. ©2005 Crestron Electronics, Inc Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF infiNETTM Dimmers Contents infiNETTM Dimmers: CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: Individual devices can be set up by right-clicking the device and selecting Setup this device. Follow the on-screen instructions to set up the device. Click Start to set up the devices in the order they appear on the list. The first item in the list (CLW-DIM1RF, MNET ID 0D, "BR dimmer") will be highlighted and the upper portion of the window will indicate the type of device. 16 · infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Operations Guide - DOC. 6396 Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF infiNETTM Dimmers CLW-DIM1RF Devices in Setup Mode Window; Identifying a Device The LEDs on all of the CLW-DIM1RF dimmers on the list will flash. Physically locate the dimmer in the bedroom with the flashing LED and touch the top or bottom of the large button. The status of the "BR dimmer" will change from "Not Verified" to "Setup Complete" and the next device on the list (CLW-DIM1RF, MNET ID 03, "LR dimmer") will be highlighted. Touching a device may result in setting a duplicate MNET ID. A warning will be displayed. Duplicate MNET ID Warning Click Yes to set the device to the duplicate MNET ID (the status will be listed with the comment "An error occurred changing the network ID of one or more devices. " Clicking No will skip the setup process for that device and continue to the next device on the list. If two devices share a duplicate MNET ID, the devices with the duplicate MNET IDs must be set up again. NOTE: If the device does not respond and/or register, click Skip. Operations Guide - DOC. 6396 infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF · 17 infiNETTM Dimmers Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Setup Lighting Window, Setup of First Device in List Completed 10. Continue identifying all of the remaining unidentified devices on the list. When all devices have been identified, a summary will be displayed in the upper portion of the window. Setup Complete 11. Click Close to close the window once all devices have been identified. All of the identified devices in the Network Device tree will be icon as shown in the following diagram. indicated with the 18 · infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Operations Guide - DOC. 6396 Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF infiNETTM Dimmers Network Device Tree with Devices Set Up with SMW Program Tree Manually Setting the MNET ID in Crestron Toolbox The following method permits you to change the MNET ID of any infiNET device on the infiNET network through the "Network Device Tree" window. This method does not change the MNET ID as assigned in SIMPL Windows. For information on setting the MNET ID in SIMPL Windows, refer to "Setting the MNET ID in Device Settings" on page 26. If MNET IDs have already been assigned in a SIMPL Windows program, use the Touch Settable ID method described on page 12 to change the MNET ID to match the MNET ID specified in the SIMPL Windows program. NOTE: You may also use D3 Pro or SystemBuilder to perform MNET ID setup. [. . . ] Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]