User manual CRESTRON CLW-SW1RF 4RF SWS1RF 4RF SLVS1RF

[. . . ] Crestron CLW-SW1/4RF, CLW-SWS1/4RF, CLW-SLVS1RF infiNETTM Switches Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. Windows® and Windows® XP are registered trademarks of Microsoft Corporation in the United States and other countries. ©2005 Crestron Electronics, Inc Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNETTM Switches Contents infiNETTM Switches: CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If two devices share a duplicate MNET ID, the devices with the duplicate MNET IDs must be set up again. NOTE: If the device does not respond and/or register, click Skip. Operations Guide - DOC. 6397 infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF · 17 infiNETTM Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Setup Lighting Window, Setup of First Device in List Completed 10. Continue identifying all of the remaining unidentified devices on the list. When all devices have been identified, a summary will be displayed in the upper portion of the window. Setup Complete 11. Click Close to close the window once all devices have been identified. All of the identified devices in the Network Device tree will be icon as shown in the following diagram. indicated with the 18 · infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Operations Guide - DOC. 6397 Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNETTM Switches Network Device Tree with Devices Set Up with SMW Program Tree Manually Setting the MNET ID in Crestron Toolbox The following method permits you to change the MNET ID of any infiNET device on the infiNET network through the "Network Device Tree" window. This method does not change the MNET ID as assigned in SIMPL Windows. For information on setting the MNET ID in SIMPL Windows, refer to "Setting the MNET ID in Device Settings" on page 26. If MNET IDs have already been assigned in a SIMPL Windows program, use the Touch Settable ID method described on page 12 to change the MNET ID to match the MNET ID specified in the SIMPL Windows program. NOTE: You may also use D3 Pro or SystemBuilder to perform MNET ID setup. Refer to the respective help file for more information. Open Crestron Toolbox and establish communications with the control system (refer to "Establishing Communications" on page 28). Use the Network Device Tree and connect to the control system to verify that the gateway is connected to the control system and that all infiNET devices are acquired on the gateway. infiNET devices with MNET ID 01 will be shown with a icon as shown in the following diagram. Operations Guide - DOC. 6397 infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF · 19 infiNETTM Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF "Network Device Tree" with Newly Added infiNET Device 3. Expand the device tree until the MNET ID that is to be changed is visible. Right-click on the MNET ID, and when the sub-menu appears, select Change Network ID. "Network Device Tree" - Sub-Menu NOTE: Any infiNET switch in the Network Device Tree can be identified using Crestron Toolbox. Right-click a device in the Network Device Tree and select "Identify this. . . ". Press a button on the switch to identify the device. 20 · infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Operations Guide - DOC. 6397 Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 4. [. . . ] Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]