User manual CRESTRON CN-WP12

[. . . ] Crestron CN-WP12F and CN-WP12N Source and Numeric Keypads Contents Source and Numeric Keypads: CN-WP12F and CN-WP12N Description Functional Description Physical Description Leading Specifications Setup Custom Switch Cap Installation Network Wiring Keypad Installation Identity Code Programming with SIMPLTM Windows® How the Program Works How to Create the Program Problem Solving Troubleshooting Further Inquiries Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty 1 1 1 1 3 3 3 6 7 7 8 8 9 12 12 12 13 13 13 Operations Guide - DOC. 5788A Contents · i Crestron CN-WP12F and CN-WP12N Source and Numeric Keypads Source and Numeric Keypads: CN-WP12F and CN-WP12N Description Functional Description The Source and Numeric Keypads, CN-WP12F and CN-WP12N, are wall-mounted user-interface devices designed to work with the CNX-PAD8 Professional Audio Distribution Processor. The keypads are installed into the physical rooms of a building to control the CNX-PAD8 and its audio source devices. The CN-WP12F serves as the source keypad. [. . . ] Avoid tinning too far up the wires or the end becomes brittle. After tinning the twisted ends, insert the tinned connection into the network connector and tighten the retaining screw. Repeat the procedure for the other three network conductors. Keypad Installation After the network wiring has been installed, the CN-WP12F and CN-WP12N are installed into standard electrical switch boxes. Designer or decorator wall-plates (not supplied) should be used to complete the mechanical installation. Identity Code Every equipment and user interface within the network requires a unique identity code (NET ID). These codes are recognized by a two-digit hexadecimal number from 03 to FE. The NET ID of the keypad must match an ID code specified in the SIMPL Windows program. The NET IDs of the CN-WP12F and CN-WP12N keypads are factory set to 4C and 48, respectively. The NET IDs of multiple keypads must all be unique and changed from a PC via VisionToolsTM Pro (VT Pro) or SIMPL Windows. NOTE: VT Pro is a Windows compatible software package for creating Crestron touchpanel screen designs. The method for changing the unit's NET ID is identical regardless of the software chosen. Attach one of the keypads to the control system (verify that the software is running) and complete the following steps to change the NET ID. Disconnect all network devices from the control system, except for the one keypad that needs to have its NET ID set. Select Tools | Viewport to open the "Crestron Viewport" dialog box. The software checks the baud rate and then opens the "Set Network ID" dialog box. In the dialog box, highlight the keypad. The NET ID of the keypad appears in the box below the list. Use the scroll arrow to assign another NET ID. Operations Guide - DOC. 5788A Source and Numeric Keypads: CN-WP12F and CN-WP12N · 7 Source and Numeric Keypads 6. 9. Crestron CN-WP12F and CN-WP12N When the assigned NET ID appears, select the Set ID button to initiate the change. The software responds with a successful message to confirm the changed NET ID. To verify this procedure, select Diagnostics | Report Network Devices. Confirm that the keypad has a new NET ID code. [. . . ] No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. [. . . ]