User manual CRESTRON CNAMPX-2X60

[. . . ] This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Contents 2 Channel Professional Audio Amplifier: CNAMPX-2X60 1 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The software checks the baud rate and then opens the "Set Network ID" dialog box. In the "Set Network ID" dialog box, select the CNAMPX-2X60 from the Current Network Devices text window. From the Choose the new network ID for the selected device (Hex): text box, select the new Net ID for the CNAMPX-2X60. This will display the "ID command has been sent" dialog box. In the "Command Complete" dialog box, click OK. In the Current Network Devices text window, verify the new NET ID code. In the "Set Network ID" dialog box, click Close. 4. 8178 2 Channel Professional Audio Amplifier: CNAMPX-2X60 · 9 2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 NOTE: The new NET ID code may also be verified by selecting Diagnostic | Report Network Devices in the Viewport. Repeat this procedure for each CNAMPX-2X60 to be added to the Cresnet system. Typical Room Configuration The following figure shows a typical head-end/room audio configuration using the CNAMPX-2X60. Programming with SIMPL Windows SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use programming language that is completely integrated and compatible with all Crestron system hardware. The objects that are used in SIMPL are called symbols. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. The next three sections describe a CNAMPX-2X60 within a SIMPL Windows program. The first section provides initial configuration information, the second section details the SIMPL symbol and the third section provides the location of the example program. NOTE: The following descriptions assume that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. Configure CNAMPX-2X60 Program To create a program with a CNAMPX-2X60 in the Configuration Manager of SIMPL Windows, refer to the table below for initial configuration information. 10 · 2 Channel Professional Audio Amplifier: CNAMPX-2X60 Operations Guide ­ DOC. 8178 Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Configure CNAMPX-2X60 Program DEVICE LIBRARY Control Systems SYMBOL REQUIRED Desired control system DROP WHERE System Views ADDITIONAL SETUP Refer to the documentation supplied with the specific control system for additional setup information. CHANGE NET ID (OPTIONAL) Double-click on CNAMPX-2X60 (or single-click then right mouseclick) on CNAMPX-2X60. Select NET ID then select desired hexidecimal ID. Cresnet Control Modules / Cresnet Audio Modules CNAMPX-2X60 System Views, Cresnet Units CNAMPX-2X60 Symbol The diagram below shows the CNAMPX-2X60 symbol in the SIMPL Windows Programming Manager. The two tables on the next page list the input and outputs, respectively, and their functional descriptions. Detail View of the CNAMPX-2X60 Symbol in SIMPL Windows' Programming Manager NOTE: Any software that uses the CNAMPX-16X60 symbol, including SIMPL Windows and Crestron AppBuilder, may be used to program the CNAMPX-2X60. If used, only 2 audio channels will be utilized and the following inputs and outputs of the CNAMPX-16X60 symbol are ignored; Rm*_En, Rm_To_Monitor, Rm*_Amp_Fault, Rm*_Wire_Fault, LeftSigLevel, and RightSigLevel. [. . . ] Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. [. . . ]