Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CRESTRON CNOXM. We hope that this CRESTRON CNOXM user guide will be useful to you.
Lastmanuals help download the user guide CRESTRON CNOXM.
Detailed instructions for use are in the User's Guide.
[. . . ] The Oxmoor DCA-2 controls two discrete audio channels, A and B. Volume is controlled in 29 steps of 1. 5 dB attenuation from 0 dB to -43. 5 dB, with the 30th step for -90 dB "full kill" attenuation. The remote inputs can be "daisy-chained" with multiple RC-16 Remote Control Units. [. . . ] Either or both channels may be recalled to the "Preset" level by momentarily asserting the "Preset" signal inputs. "Priority" is a temporary setting that can be used for paging functions. The volume will return to the previous level after the "Priority" signal input is deasserted.
REMOTE
CONTROL
SYSTEMS
1
Specifications subject to change without notice.
Doc. 8084 7. 95
CRESTRON CNOXM
CABLING AND CONNECTIONS:
Oxmoor DCA-2 Interface Module
Standard 4 or 6-conductor, modular telephone cables are used to interconnect the CNOXM to the DCA-2 and RC-16. (The 4-conductor cables may be used when "Preset" and "Priority" functions are not required). Typically, RJ-12 style 6-conductor cables with RJ-11 size connectors are used. Refer to Oxmoor Model DCA-2 / Model RC-16 Installation and Operation Manual (PN 1700001) for further details. NOTE: In order for the CNOXM to correctly register feedback, BOTH channels of the DCA-2 must be connected to the CNOXM. It is possible to control multiple DCA-2 channels with one RC-16 as in a typical room combining system. The SIMPL ABUFFER can drive multiple channel volumes with the volume feedback from one channel. A simple example of a four room combining system uses two DCA-2's, two CNOXM's and four RC-16's. When the rooms are separated, each RC-16 controls the volume of it's respective room. In the combined mode, CNIN inputs enable ABUFFER's to give any of the RC-16's control of all four channel volumes. Each unique component on the CRESNET II network requires the setting of an identity code (ID CODE). ID CODEs are twodigit hexadecimal numbers, from 10 to FE. The ID CODE of the CNOXM should be set to match the ID CODE specified in the NET. ID statement of the CRESNET II SIMPL program (see syntax above). [. . . ] The CNOXM has an indicator marked NET POWER. This indicator is lit when 24 volts is supplied to the unit over the network. The indicator marked ID SELECT is lit when the CRESNET II system is communicating with the unit. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CRESTRON CNOXM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CRESTRON CNOXM will begin.
