User manual CRESTRON CNRACKX-DP

[. . . ] Crestron CNRACKX-DP CNX Dual Processor Modular Control System Contents CNX Dual Processor Modular Control System: CNRACKX-DP 1 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Leading Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For this ZIP file to be used by SIMPL Windows, select File | Import Archived Program from the Crestron Viewport. This will present a dialog similar to the following, after selecting the ZIP to import: 16 · CNX Dual Processor Modular Control System: CNRACKX-DP Operations Guide - DOC. 8151 Crestron CNRACKX-DP CNX Dual Processor Modular Control System Import an Archived Program Dialog Box The job may be copied to any folder or directory, and the User IR, Macro, and SIMPL+ files will be copied to the proper directories. If a version of SIMPL Windows lower than 1. 30. 01 is being used, copy the ZIP file into the job directory stated in step 1, then extract the files with a program called WinZip. Obtain a copy of this program from their website (www. winzip. com) on the internet. Extract the files into the same directory where the archive was copied. Once files are extracted, retain the original ZIP file in case the files need to be restored at any point. The User IR, Macro, and SIMPL+ modules will need to be copied to their proper directories manually. File Types There are quite a few file types involved with Crestron control software. This section explains the different types that might be encountered in each directory. In many cases, the supplied software is grouped into a number of subdirectories. For example, after copying the files to the hard disk, the directory structure may appear as shown below. Possible Directory Structure Operations Guide - DOC. 8151 CNX Dual Processor Modular Control System: CNRACKX-DP · 17 CNX Dual Processor Modular Control System Crestron CNRACKX-DP Ops Subdirectory - The files in this subdirectory contain the CNRACKX-DP operating system with which the program was tested. Ensure that the operating system version currently loaded is equal to or newer than the version included here, so that the program runs properly. For help with uploading an operating system, refer to "Updating the Control System" on page 29. File Types in Ops Subdirectory FILE TYPE . upz DESCRIPTION This is a control system file. For more information regarding these files, refer to "Upgrading the Control System". Programs Subdirectory - The files in this subdirectory (shown on the next page) contain the system program. This is the main program that loads into the CNRACKX-DP and determines the exact functionality of the system. File Types in Programs Subdirectory FILE TYPE . asv . bin . dip DESCRIPTION SIMPL Windows auto-save file. This is the executable code for the CNRACKX-DP. This is the default IP Table that contains the IP addresses of all of the ethernet devices in the system. It is generated when the program is compiled and the CNRACKX-DP contains optional CNXENET+ expansion cards and ethernet devices. This file contains information required by Test Manager (see SIMPL Windows help for more information) for debugging programs in realtime. It is generated each time the program is compiled. This is the SIMPL-C file that is generated from the SMW file when a program is compiled. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. [. . . ]