User manual CRESTRON CNRFHT-15A 30A

[. . . ] Crestron CNRFHT-15A/30A Hand-Held Wireless Transmitters Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2002 Crestron Electronics, Inc. Crestron CNRFHT-15A/30A Hand-Held Wireless Transmitters Contents Hand-Held Wireless Transmitter: CNRFHT-15A/30A 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Viewport displays the message: "Position IR probe over sensor on transmitter. Do not remove IR probe until transmitter LED stops blinking. Click OK to begin programming the transmitter. " 6. Click OK to begin programming. When the transmitter LED stops blinking, remove the IR probe. 6 · Hand-Held Wireless Transmitter: CNRFHT-15A/30A Operations Guide ­ DOC. 8092A Crestron CNRFHT-15A/30A Binary Code Method Hand-Held Wireless Transmitters Changing the transmitter RF ID using binary code is a simple process. different levels of programming knowledge. The flexibility of each tool is Do not forward any queries to this proportional to the degree of programming expertise (i. e. , the more flexible, the address. Instead refer to "Further Inquiries" on page 14 for assistance. more a programmer needs to know and account for). Of course, one can program using the easiest method (Crestron AppBuilder) or use advanced techniques that are available from SIMPL Windows to customize the job. Have a comment about Crestron software? Programming with the Crestron AppBuilder The easiest method of programming, but does not offer as much flexibility as SIMPL Windows. The Crestron AppBuilder offers automatic programming for such residential and commercial applications as audio distribution, home theater, video conferencing, and lighting. The Crestron AppBuilder guides you through a few basic steps for designating rooms and specifying the control system, touchpanels, devices, and functionality. The Crestron AppBuilder then programs the system, including all touchpanel projects and control system logic. The CNRFHT-15A/30A transmitter is one of the user interfaces that you may choose within AppBuilder. The Crestron AppBuilder is fully integrated with Crestron's suite of software development tools, including SIMPL Windows, VT Pro-e, Crestron Database, User IR Database, and User Modules Directory. The Crestron AppBuilder accesses these tools behind the scenes, enabling you to easily create robust systems. Programming with SIMPLTM Windows NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. NOTE: In the following description, the PRO2 control system is used. SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes a transmitter Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. [. . . ] Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]