Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CRESTRON CNWMBG-10A. We hope that this CRESTRON CNWMBG-10A user guide will be useful to you.
Lastmanuals help download the user guide CRESTRON CNWMBG-10A.
Detailed instructions for use are in the User's Guide.
[. . . ] CRESTRON CNWMBG-10A
DESCRIPTION:
Wall-Mount Wired Panels
The CNWMBG-10A wired panel, illustrated in figure 1, interfaces with a CRESNET II control system over the CRESNET II network. [. . . ] ID CODES are two-digit hexadecimal numbers, from 10 to FE. The ID CODE of the panel should be set to match the ID CODE specified in the NET. ID statement of the CRESNET II SIMPL-C program referencing the panel (refer to SYNTAX section). Accessible through the back cover are two miniature circuit-mounted rotary switches, identified as H and L. These 16-position hexadecimal switches can be set to 0 through F. Using a small screwdriver, rotate the arrow in the center of the switch marked H so that it points to the first (or most-significant) digit or letter of the specified ID CODE. Set the switch marked L to the second (least-significant) digit or letter of the specified ID CODE.
REMOTE
CONTROL
SYSTEMS
1
Specifications subject to change without notice.
DOC. 8078
CRESTRON CNWMBG-10A
Preparation for Use
Wall-Mount Wired Panels
The 4-pin connector marked NET must be wired to the CRESNET II network. Network termination points are available at the control system power supply. [. . . ] Buttons or bargraphs which are not used need not be assigned a signal name.
SYNTAX:
The following syntax codes are provided for compatibility purposes only.
NET. ID <10 to FE>: CNWP i1, o1 = <signal name> i2 = <signal name> o2 = <signal name> "= " " i10 = <signal name> o10 = <signal name> <BAR1> = <signal name>
\ button and LED combined \ independent button \ independent LED
\ first bargraph level
FURTHER INQUIRIES:
If after reviewing this Operations Guide you still have additional questions, please contact a CRESTRON technical support representative by dialing (800) 237-2041 or (201) 894-0660.
REMOTE
CONTROL
SYSTEMS
2
Specifications subject to change without notice.
DOC. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CRESTRON CNWMBG-10A
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CRESTRON CNWMBG-10A will begin.
