User manual CRESTRON CNXCAGE

[. . . ] 6 Operations & Installation Guide - DOC. 8119 Contents · i CRESTRON 3-Card Expansion Cage: CNXCAGE Description Functional Description The CNXCAGE is an optional feature designed specifically for Crestron's CNMSX-AV integrated control system. The field-upgradable unit offers three internal expansion slots to enhance and add versatility to the existing control system. Physical Description The CNXCAGE, shown below, is a box-like unit that fits into a CNMSX-AV. Two blank plates are attached to the CNXCAGE when shipped. [. . . ] NOTE: It is assumed that the CNMSX-AV rack ear brackets are not attached during this installation procedure. CNXCAGE Installation (1 of 4) 1. 2. Place the CNMSX-AV right-side-up on a flat surface and remove four screws from the top of the unit. There are 6 2 · 3-Card Expansion Cage: CNXCAGE Operations & Installation Guide - DOC. 8119 CRESTRON 3. Lift and remove CNMSX-AV top cover . CNXCAGE Installation (2 of 4) 4. 6. Remove four screws Remove cover plate . that secure cover plate to CNMSX-AV. Turn CNMSX-AV onto its side and remove two screws , and two washers from the underside of the unit. , two nuts CNXCAGE Installation (3 of 4) 7. Attach the supplied cable assembly to the P1 connector on the CNXCAGE . The cable assembly has been design to fit the Operations & Installation Guide - DOC. 8119 3-Card Expansion Cage: CNXCAGE · 3 CRESTRON appropriate connector. There is no danger of improperly connecting the CNXCAGE. Reposition the CNMSX-AV right-side-up on a flat surface and insert the CNXCAGE with attached cable assembly into the CNMSXAV through the opening at the top and side of the unit. to the P3 connector on the CNMSX-AV to the CNMSX-AV with four screws and 9. 10. Secure the CNXCAGE two screws . CNXCAGE Installation (4 of 4) 11. NOTE: Verify that four short screws (6 mm) screws (9 mm) are installed on the side. with 12 screws and four screws are installed on top and 12 long 4 · 3-Card Expansion Cage: CNXCAGE Operations & Installation Guide - DOC. 8119 CRESTRON Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron technical support representative; refer to "Further Inquiries" on page 5. CNXCAGE Troubleshooting TROUBLE Expansion card inserted into CNMSX-AV is not functioning. POSSIBLE CAUSE(S) CORRECTIVE ACTION Follow installation procedures in this Damaged pin on the CNXCAGE P1 or CNMSX- guide and inspect connector pins. Follow installation procedures in this guide and inspect cable assembly. Further Inquiries If after reviewing this Operations & Installation Guide for the CNXCAGE, you cannot locate specific information or have questions, please take advantage of Crestron's award winning technical support team by calling: · · · · · · In the US and Canada, call Crestron's corporate headquarters at 1888-CRESTRON [1-888-273-7876] or 1-201-767-3400. In Europe, call Crestron International at +32-15-50. 99. 50. In Asia, call Crestron Asia at +852. 2341. 2016. In Latin America, call Crestron Latin America at +525. 574. 15. 90. For local support from exclusive Crestron factory-trained personnel call: In Australia, call Soundcorp at +613. 941. 61066. In New Zealand, call Amber Technologies at +649. 410. 8382. Operations & Installation Guide - DOC. 8119 3-Card Expansion Cage: CNXCAGE · 5 CRESTRON Return and Warranty Policies Merchandise Returns / Repair Service 1. [. . . ] Incandescent lamps are completely excluded from Crestron's Limited Warranty. CRESTRON shall, at its option, repair or replace any product found defective without charge for parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty. CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. [. . . ]