User manual CRESTRON CNXTA

[. . . ] Crestron CNXTA CNX Telephone Audio Interface Card Operations & Installation Guide Crestron CNXTA CNX Telephone Audio Interface Card Contents CNX Telephone Audio Interface Card: CNXTA Description Functional Description Physical Description Leading Specifications Setup Installation Audio Wiring Specifications Hookup WAV File Audio Messages Downloadable WAV Files for the CNXTA To Record a WAV File Message To Convert a WAV File To Create WAV Messages from Individual Files Set WAV File or Message Properties, Save, and Exit Configure CNXTA CNXTA File List Export File List Button Import File List Button Send New Files to CNXTA Button Programming with SIMPL Windows CNXTA Basic Touchpanel CNXTA Symbol CNXTA Basic Program Problem Solving Troubleshooting Further Inquiries Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty 1 1 1 1 3 4 4 4 5 5 5 7 8 9 11 14 15 16 16 16 16 17 18 20 23 23 23 24 24 24 Operations & Installation Guide - DOC. 8144A Contents · i Crestron CNXTA CNX Telephone Audio Interface Card CNX Telephone Audio Interface Card: CNXTA Description Functional Description The CNX Telephone Audio Interface Card, CNXTA, allows access and control of a Cresnet system through standard telephone lines. The CNXTA recognizes and generates telephone Dual-Tone Multifrequency (DTMF) signals. When the CNXTA is installed, these signals are used by a Cresnet system to remotely operate any device controlled by the system. [. . . ] When selected, this will open a dialog box that prompts the user for a new file position. If the user selects anything but an empty file position as the new location, an error message opens and the move will not occur. Otherwise, the file will be immediately moved to the new location in the CNXTA card. Delete becomes available if any entry is selected (including multiple-selection). If the entry is stored in the CNXTA, the file will be permanently removed from the card. If the file is located on the PC, the entry will be cleared. The Choose File command is available if only one entry is selected and does not contain a file (it is empty). This command will prompt the user to select a file to show in the selected list entry. Double-clicking on an empty entry will also open the selected file options dialog box. This command is the default item for the list and is normally available. When clicked, Select All highlights and selects all of the entries in the list. This command is always available. Export File List Button Once files are added to the file list, they can then be exported to a CNXTA file with a XTA extension. This XTA file will store the data as well as file positions associated with any list. This is very useful for distributing sets of data with a program. If files were chosen and then Send New Files to CNXTA was selected, those files will still be available for exporting because a temporary file location reference is maintained on disk. Once the configuration utility is closed and re-entered, these files will no longer be available for exporting because the utility has no location reference. Import File List Button When importing a file, a custom file selection dialog box is opened. This dialog box displays details about the currently selected XTA file. Specifically, the file count and the file position range. This dialog box also allows the user to import data with an offset. This means the new position for a given file will be the stored file position plus the file offset which is useful if a user is combining sound elements from multiple sources. For example, a SIMPL+ module might require five sounds and another might require 10. If both SIMPL+ modules assumed that the sound files they were looking for started at file position 1, there would be a conflict. [. . . ] CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. [. . . ]