User manual CRESTRON CPC-LMT

[. . . ] 6 CRESTRON Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operations & Installation Guide - DOC. 5758 Contents · i Lens Mount Accessory: CPC-LMT Description Functional Description The CPC-LMT is an accessory for the Crestron CPC-CAMI. This accessory provides simple flexibility in mounting a camera/lens assembly. [. . . ] 5758 5. Screw the Camera Support Rod (9) into the camera's mounting hole. If the camera has multiple mounting holes, choose the hole that allows the Adjustment Block (8) to fit into the adjustment slot in the Camera Mount Plate (5). Insert Camera Support Rod (9) into the in the Adjustment Block (8). Position the camera /lens assembly (14) and (15) on the Camera Mounting Plate (5). Insert the Adjustment Block (8) into the adjustment slot of the Camera Mount Plate (5). Position the camera/lens assembly so the balance point is as close to Mounting Block (6) as possible. 6. Tighten lens Screw (11) or (11A) with a Phillips tip screwdriver. Tighten Locking Screws (10) and (13) with the hex keys provided. Hex Screws (4) and washers (17) provide additional front to back adjustment. If necessary, select a pair of holes in the Interim Plate (3) that would allow proper balancing. Use either the Adjustment Block (6) or the slots in the Platform Support Arm (1) to adjust for various camera/lens widths. After proper positioning of the camera/lens assembly, tighten Screws (4) and (17). The camera/lens and CPC-LMT are now one assembly. Adjust the assembly's height to align the center of the lens with the center of tilt rotation. Fit the camera and CPC-LMT assembly onto the CPC-CAMI by aligning the Pins (16) with the slots of the CPC-CAMI. Secure the CPC-LMT to the CPC-CAMI with the two ¼-20 Screws (2). Operations & Installation Guide - DOC. 5758 Lens Mount Accessory: CPC-LMT · 3 CPC-LMT Exploded View 4 · Lens Mount Accessory: CPC-LMT Operations & Installation Guide - DOC. 5758 Problem Solving Troubleshooting The CPC-LMT is designed to be flexible enough to mount to most camera/lens configurations. If further assistance is required, please contact a Crestron technical support representative. Refer to "Further Inquiries" below. Further Inquiries If after reviewing this Operations & Installation Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning technical support team by calling: · · · · · · In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. In Europe, call Crestron International at +32-15-50-99-50. In Asia, call Crestron Asia at +852-2341-2016. [. . . ] CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed. This warranty shall be the sole and exclusive remedy to the purchaser. In no event shall CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. [. . . ]