User manual CRESTRON SP-RY

[. . . ] Connect the other end of the cable to one of the outputs on the SP-1. The device cable should be connected to the appropriate devices. To locate the Q-Code for the Relay Controller, refer to the latest revision of the SmartPresenter ­ Quick Guide (DOC. NOTE: An external power supply is not necessary when using the SP-RY with the SmartPresenter system. Connect SP-RY to SP-1 and Devices. To Devices Serial Data Cable Serial Data Cable Operations Guide - DOC. [. . . ] 5737 Relay Controller: SP-RY · 5 CRESTRON Programming SmartPresenterTM SP-1 The SmartPresenter is field programmable and does not require a PC. Refer to the latest revision of the SmartPresenter ­ Quick Guide (DOC. SmartPresenter software is available, however, it is only necessary for changing drivers, cloning SP-1 machines, and updating firmware. SmarTouchTM ST-CP The SmarTouch systems are easily programmed using the SmarTouch STS Wizard. In several easy steps a SmarTouch system can be programmed and up-loaded. The STS Wizard is available in VisionTools ProTM software. SmarTouch systems may also be custom programmed using Crestron's easy-to-use SIMPLTM Windows® and VisionTools ProTM software. CNMSX The CNMSX is programmed using Crestron's easy-to-use SIMPLTM Windows® software. Example Program shown as Block Diagram This example allows a touchpanel to control a lift via the IR-Device (SP-RY). Feedback is provided to alert the touchpanel user that a button is, in fact, being pressed. The IR Device represents the driver for the SP-RY. This SP-RY driver can be located in the Crestron Database (version 11. 7. 207 or later). 6 · Relay Controller: SP-RY Operations Guide - DOC. 5737 CRESTRON Problem Solving Troubleshooting TROUBLE SP-RY not functioning. POSSIBLE CAUSE(S) SmartPresenter Q-Code incorrect SmarTouch ST-CP /CMMSX Incorrect Driver Selected No 12v power supply CORRECTIVE ACTION Verify that the correct Q-Code for the device has been assigned. Select the correct driver from the Crestron database. 12v power supply must be used (see "Specifications" on page 2). Further Inquiries If after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning technical support team by calling: · · · · · · In the US and Canada, call Crestron's corporate headquarters at 1. 888. CRESTRON [1. 888. 273. 7876] or 1. 201. 767. 3400. In Europe, call Crestron International at +32. 15. 50. 99. 50. In Asia, call Crestron Asia at +852. 2341. 2016. In Latin America, call Crestron Latin America at +525. 574. 15. 90. For local support from exclusive Crestron factory trained personnel call: In Australia, call Soundcorp at +613. 941. 61066. In New Zealand, call Amber Technologies at +649. 410. 8382. Operations Guide - DOC. 5737 Relay Controller: SP-RY · 7 CRESTRON Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. [. . . ] CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed. This warranty shall be the sole and exclusive remedy to the purchaser. In no event shall CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. [. . . ]