User manual CRESTRON ST-BTPN

[. . . ] 6096), the STX1550C and STX-1550CW Operations Guides (Doc. 5849, respectively), the ST-1700C Operations Guide (Doc. 6051) and the STX1700C and STX-1700CW Operations Guides (Doc. The latest versions of the guides which includes their respective international versions are available from the Downloads | Product Manuals section of the Crestron website (www. crestron. com). Specifications The following table provides specifications for the ST-BTPN. [. . . ] Recharge the ST-BTPN after storage prior to use. Operations and Installation Guide - DOC. 6088 Rechargeable Battery Pack: ST-BTPN · 5 Rechargeable Battery Pack Crestron ST-BTPN Charging NOTE: Typically, the battery pack is good for 500 charge/discharge cycles. To charge the ST-BTPN: · Use the powered ST-DSN docking station with battery guide; or · Install the ST-BTPN in a ST-1550C or 1700C and mount touchpanel on a powered ST-DSN docking station. CAUTION: Internal damage to battery pack may occur if it is mounted by itself on the ST-DSN without the battery guide. NOTE: The battery pack may take up to 6 hours to charge in a powered touchpanel. Refer to Specifications on page 2 for charging information. For further information, consult the ST-DSN Operations Guide (Doc. The latest version of the guide is available from the Downloads | Product Manuals section of the Crestron website (www. crestron. com). Installation The unique design of the ST-BTPN prevents it from being installed improperly. The rechargeable battery pack fits only one way in the battery compartment of the touchpanel. Although the ST-BTPN can be installed in several Crestron wireless touchpanel models, the ST-1700C and STX-1700C are the most common models to use the battery pack. These models have the same shape and battery compartment location. Therefore, as an example, the illustration on the next page shows the ST-BTPN properly seated in the ST-1700C. Complete the steps on the next page to install the battery. 6 · Rechargeable Battery Pack: ST-BTPN Operations and Installation Guide - DOC. 6088 Crestron ST-BTPN Rechargeable Battery Pack ST-BTPN installed in a touchpanel (ST-1700C) CRESTRON Crestron Electronics, Inc. Rockleigh, NJ 07647 FCC ID: EROST-1700C SEE MANUAL NOTE: The ST-BTPN is shipped fully discharged. Charge the battery pack in a well-ventilated area away from sparks, flames, or smoking. Place touchpanel screen-side down on a clean and soft surface. Place the designated end of the ST-BTPN into the touchpanel battery compartment. Slowly rotate ST-BTPN in compartment so that external face is visible. Verify proper installation with audible click of rechargeable battery pack into battery compartment. Touchpanel latch secures the ST-BTPN and prevents the battery pack from falling out. Operations and Installation Guide - DOC. 6088 Rechargeable Battery Pack: ST-BTPN · 7 Rechargeable Battery Pack ST-BTPN Orientation for Installation Touchpanel latch fits into this cutout Crestron ST-BTPN This side facing out CRESTRON Crestron Electronics, Inc. [. . . ] CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. Windows is a registered trademark of Microsoft Corporation. [. . . ]