User manual CRESTRON ST-CS

[. . . ] Crestron ST-CS Current Sensor Module Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. © 2004 Crestron Electronics, Inc. Crestron ST-CS Current Sensor Module Contents Current Sensor Module: ST-CS 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website (www. crestron. com). To post a question or view questions you have submitted to Crestron's True Blue Support, log in at http://www. crestron. com/accounts/login. asp. First-time users will need to establish a user account. 10 · Current Sensor Module: ST-CS Operations Guide - DOC. 5677A Crestron ST-CS Current Sensor Module Earliest Version Software Requirements for the PC NOTE: Crestron recommends that you use the latest software to take advantage of the most recently released features. The latest software is available from the Downloads | Software Updates section of the Crestron website (www. crestron. com). The following are the earliest useable software version requirements for the PC: · · · SIMPL Windows, any version. Requires SIMPL+ Cross Compiler version 1. 1. Crestron Viewport version 3. 35 or later. Programming with SIMPL Windows NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. NOTE: The following are file extensions for programs that include an ST-CS, developed for specific control system types: . smw source file . spz compiled file for 2-series . bin compiled file for CNX generation . csz compiled file for CNX generation with SIMPL+ . ush compiled file for CNX generation with SIMPL+ header file . usp source code module for SIMPL+ . umc user macro for SIMPL NOTE: In the following description, the PRO2 control system is used. SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes an ST-CS. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System Views Operations Guide ­ DOC. 5677A Current Sensor Module: ST-CS · 11 Current Sensor Module Crestron ST-CS The System Views lower pane displays the PRO2 system tree (refer to the following graphic). This tree can be expanded to display and configure the communication ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate an ST-CS into the system, drag the ST-CS from the Cresnet Control Modules | Cresnet I/O Control & Other Modules folder of the Device Library and drop it in System Views. The PRO2 system tree displays the ST-CS in Slot 9, with a default Net ID of 18 as shown in the following illustration. NOTE: The first ST-CS in a system is preset with a Net ID of 18 when its symbol is dragged into the upper pane of System Views. Additional ST-CS units are assigned different Net ID numbers as they are added. C2Net Device, Slot 9 Setting the Net ID in Device Settings Double-click the ST-CS icon to open the "Device Settings" window. [. . . ] Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, NJ 07647, or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]