User manual CUISINART DCC-1100

[. . . ] INSTRUCTION BOOKLET Cuisinart ClassicTM 12-Cup Programmable Coffeemaker DCC-1100 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1. To protect against electric shock, do not place cord, plug, or base in water or other liquids. Close supervision is necessary when any appliance is used by or near children. Always unplug from outlet when not in use and before cleaning. [. . . ] Auto On The Auto On feature is used to program the start time of the brew cycle. The auto on time can be set for any time, day or night. The PM indicator is displayed on the LCD for nighttime program times. Auto Off The Auto Off feature is used to shut off the coffeemaker at a preset time, anywhere from 0 to 4 hours. Program Set The Program Set function is used to set the time for the Auto On function. Brew The Brew function is used to start the brew cycle directly. Clock Set Used to program the time of day. f. Audible Tone (not shown) The Cuisinart ClassicTM 12-Cup Programmable Coffeemaker is equipped with an audible tone which will sound 5 times when the coffee has completed brewing (coffee will continue to stream from the filter for a few seconds after tone). On/Off Button Used to turn your coffeemaker on and off; also works in tandem with the function knob. Hour and Minute Buttons For use in setting hour and minute for time of day, and auto on time. Clean Setting Used to indicate time to clean your coffeemaker to remove calcium buildup. 1-4 Cup Setting For brewing smaller pots of coffee ­ it provides double heating of the water, so coffee is piping hot. 6 PROGRAMMING YOUR COFFEEMAKER TO BREW COFFEE 1. Turn the function knob to "Brew. " 2. The red On indicator light will illuminate and brew cycle will begin. TO TURN THE COFFEEMAKER OFF Press the On/Off button and release. Note: To program the coffeemaker to shut off automatically, see To program the Variable Auto Off instructions below. PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME To set the time: 1. Turn the function knob to "Clock. " a. To use: When making a smaller amount, press the 1-4 button on the control panel after turning on the unit. Power Loss Back-up One-minute protection in case a breaker trips, the unit is unplugged, or the power fails. It holds all programmed information, including time of day, auto on time and auto off time. MAKING COFFEE Before you make the first pot of coffee in your new Cuisinart® coffeemaker, we recommend operating the coffeemaker once using only water and a paper filter. This will remove any dust or residues that remain in the system from the manufacturing process. [. . . ] Notes on the Clean Function Pressing the Clean button cancels all other settings. If it is pressed accidentally, press it again to return the coffeemaker to all its previous settings. Pressing On/Off will also exit the Clean Mode and turn the coffeemaker off. 9 WARRANTY LIMITED THREE-YEAR WARRANTY This warranty supersedes all previous warranties on the Cuisinart ClassicTM 12-Cup Programmable Coffeemaker. This warranty is available to consumers only. [. . . ]