User manual CUISINART SS-1

[. . . ] INSTRUCTION BOOKLET Cup-O-MaticTMCoffeemaker SS-1 For your safety and continued enjoyment of this product, always read the instruction book carefully before using. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1. READALLINSTRUCTIONS. To protect against electric shock, do not place cord, plug, or base in water or other liquids. Close supervision is necessary when any appliance is used by or near children. Always unplug from outlet when not in use and before cleaning. [. . . ] Insert the power cord into a power outlet. OTE: The Pod and Brew buttons will flash N indicating that you have not yet primed your boiler. Before priming the boiler, be sure that the brew cup is in place. Do not place brew basket in brew cup; inserting brew basket during priming may cause overflow. 12oz capacity) under the brew cup, as water will drip out during the priming process. Prime the boiler by holding down the POD and BREW buttons simultaneously (approx. The piston will lower and the unit will pump water for 60 seconds. NOTE: Be sure not to press the BREW button first, as this may initiate the brewing mode. NOTE: If the brew cup is partially inserted, the unit will beep and the power button will fast flash. Fully insert the brew cup and press Pod and Brew again. When the boiler has been primed the unit will automatically begin heating. The Power button will flash and the Default/Lastselected setting buttons will be illuminated. When the unit is heated the Power button and Default/Last-selected buttons will be illuminated. From standby you can change settings, or initiate brewing or cleaning modes. MAKINGCOFFEE 1. Insertthewaterfilter. Remove the filter from polybag and soak in cold tap water for 15 minutes. Remove the water filter holder from the coffeemaker by lifting it out of the reservoir area with your thumb and forefinger. Using the thumb of the other hand, gently press down and pull towards you. Place the filter in the holder and close the water filter holder; you will hear a snap indicating filter is in place. NOTE:Cautionmustbeusedwheninserting thecharcoalfilter. Improperplacementin theholdercancausetearingofthefilter skin. Hold the filter under cold running tap water for 10 seconds to flush. You should place the hole openings in the side of the holder directly under the water stream. Replace the water filter holder in the reservoir area of the coffeemaker, pushing it all the way down to the base of the unit, along the reservoir wall. NOTE:We recommend changing the water filter every 60 days or more often if you have hard water. [. . . ] If your Cuisinart® Cup-O-MaticTM should prove to be defective within the warranty period, we will repair it, or if we think necessary, replace it. To obtain warranty service, simply call our toll-free number 1-800-726-0190 for additional information from our Customer Service Representatives, or send the defective product to Customer Service at Cuisinart, 150 Milford Road, East Windsor, NJ 08520. To facilitate the speed and accuracy of your return, please enclose $10. 00 for shipping and handling of the product. Please pay by check or money order (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions). [. . . ]