User manual CURTIS KCR2609

[. . . ] CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. PLEASE KEEP ALL PACKAGING MA TERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR CURTIS. 1 PREPARATION FOR USE Unpacking and Setup Carefully remove the unit from the display carton and remove all packing material from the unit itself. AC Operation Unwind the AC cord and extend it to its full length. Insert the AC cord into any convenient AC 120V~60Hz household outlet. 2 L OC A T ION OF C ONT R OL S 18 17 16 15 14 13 12 11 IR FM MHz J AZZ SLEEP TIMER 1 2 3 45 6 7 8 9 21 10 19 20 1. 9. POWER BUTTON SLEEP BUTTON TIMER BUTTON FUNCTION BUTTON REMOTE SENSOR MEM/CLK SET BUTTON MEM DN BUTTON REPEAT BUTTON SKIP/TUNE DN BUTTON 11. [. . . ] Press the FUNCTION Button one or more times until TUNER appears on the display. Press the BAND Button to select AM or FM. Press and hold one of the SKIP/TUNING Buttons to go to an available radio station. Press one of the VOLUME Buttons to adjust the volume. Improving reception: Your clock radio has an FM antenna on the back. If you are listening to an FM station and the reception is poor, move the antenna until reception improves. If you are listening to an AM station and reception is not clear, rotate your radio slightly until reception improves. Programming radio station presets: You can program as many as 10 FM and 10 AM radio station presets. After you program a station, you can tune to the station by pressing one of the SKIP/TUNE Buttons. Press the POWER Button to turn on your radio. Press the FUNCTION Button one or more times until TUNER appears on the display. Press the BAND Button to select AM or FM. Press and hold one of the SKIP/TUNE Buttons to select a radio station. Press and hold the MEM/CLK SET Button to activate the programming mode. Press one of the SKIP/TUNING Buttons to select the preset number you want to assign the station to. Press the MEM/CLK SET Button to store the station with the preset number you selected. Repeat Steps 4 through 7 to program additional presets. 8 OP E R A T ING INS T R UC T IONS To tune to a radio station preset: 1. Press the POWER Button to turn on your radio. Press the FUNCTION button one or more times until TUNER appears on the display. Press the BAND Button to select AM or FM. Press the MEM DN or MEM UP Button one or more times until the preset number you want appears on the display. To select an equalizer mode: Press the EQ Button one ore more times to select the mode you want You can select: * Classic * Jazz * Rock * Pop To Listen to a CD Your radio can play audio CDs, CD-Rs and CD-RWs. CD-Rs and CD-RWs must be finalized before you can play them on your radio. Press the POWER Button to turn on your radio. [. . . ] Press the FUNCTION Button one or more times until AUX appears on the display. Turn on the external audio device and use the device's controls to control playback. Maintenance To clean the exterior * Use a soft cloth dampened with luke warm water only to clean the exterior of your radio. * Make sure that you do not drip water into your radio. * Do not use solvents, such as benzene, because they may damage the finish. [. . . ]