User manual CURTIS LCD1988

[. . . ] ALLOW enough space between the receiver and the vall to permit proper ventilation. AVOID excessive warm locations to prevent possible damage to the cabinet or component failure. CONNECTION THIS TV power adapter can be connected to AC100v-240v, 50/60HZ, the adapter is output DC12v/3A. IMPORTANT SAFEGUARDS DEGAUSSING All colour television receivers are sensitive to magnetic influences, usually caused by either moving the receiver from one place to another or using certain electrical appliances near the receiver. this residual magnetism as it is called, so do not place it to near these device 1 OSD Manual Control Panel: Select Menu Power These buttons control your TV's basic features including on-screen menus. [. . . ] BLUE SCREEN: set the background color when the no signal, while on, it will show blue, while off , it will show white NOISE REDUCE: reduction:Reduce the noise of the picture, provide clearer picture. IMAGE SETTING VIDEO ADVANCE 9 Name of submenu Picture of submenu OSD SETTING Instructions LANGUAGE:you may select one language from English or french OSD . H: adjust the position of osd menu to left or right OSD . V: adjust the position of osd menu to up or down SOUND SETTING TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right. MUTE: turn off/on sound VOLUME: adjust the value of sound Return the value of default RESET Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE Input mode :TV 1 Press "Select" button to enter to display the TV , press "menu"to display TV menu 2 Press "+"/ "-" to scroll through the parameters 3 Press "Menu" to enter , then press "+"/"-"_to make changes the value of the parameters. 4 Press the "Select" button to exit the menu TV MAIN MENU: 10 Name submenu of Picture of submenu Instructions 1Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increases. 2Contrast: Adjust the contrast of the picture, the image becomes higher as the number increases. 5Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increases. 1:CHANNEL: select the TV chanel 2:TV MODE: Select the TV standard. 3:SKIP THIS:if you want to skip a channel, you may turn it on, then this channel will be skiped next time IMAGE SETTING TV SETTING 4:AUTO FINE:Auto adjust the tune of picture 5:FINE TUNE: If the image received is not very good, you can press PRO to select Fine Tuning item in 6: AUTO SEARCH: Auto search and save the channel BLUE SCREEN: set the background color when the no signal, while on, it will show blue, while off , it will show white NOISE REDUCE: reduction:Reduce the noise of the picture, provide clearer picture. VIDEO ADVANCE 11 Name of submenu Picture of submenu OSD SETTING Instructions LANGUAGE:you may select one language from English or french OSD . H: adjust the position of osd menu to left or right OSD . V: adjust the position of osd menu to up or down SOUND SETTING TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right. MUTE: turn off/on sound VOLUME: adjust the value of sound Return the value of default RESET Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE 12 CONNECTION AND PREPARATION Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the screen. AV/ R AV/ L V IDIO S- V IDIO AUDIO AUDIO IN P UT V GA DC TUNE R 4567 8 9 1 23 1 2 3 4 5 6 7 8 9 TUNER AUDIO AUDIO IN PUT AV / L AV / R VIDEO S- VIDEO VGA DC 13 Production Specifications: Cell Type Active size Display Area Panel spec resolution Pixel Pitch Brightness / Contrast Viewing Angle(L/R/U/D) Response Time Color System Sound System Progressive Scanning Color Tint Control Digital Comb Filter Speaker Output(RMS) Blue Background On-off Sound STERO Plug &Play Remote control TV Antenna S-Video in A/V(Composite) in PC (VGA) In PC Audio In Audio Out On working Stand By Color active matrix TFT (Thin-Film-Transistor) LCD panel 19 inch 405(h) x 255 (v) MM 1440(H)X900(V) 0. 285 x 0. 285 300 nit/ 700:1 75/75/75/60 8ms NTSC. M YES YES YES 2X3W YES YES YES YES YES YES YES YES YES YES YES <50W <5W TV System Picture Sound Features Terminal Power Consumption Accessories Net weight Gross weight Remote control/ user manual /3-color cable/ adapter /power cord, /VGA cable/Audio cable 3. 5kg 5kg Original size 525(L)x195(w)x390(H) 14 Maintaining Your TV Periodically cleaning the exterior of your TV can reduce the chance of dust being collected which can block the ventilation holes; hence, prolonging the life of your TV. Please refer to the instructions below for cleaning your TV: 1. Unplug the power Unplug the LCD TV from the wall outlet before cleaning the TV. Avoiding water and liquid Never spray or pour any liquid directly onto the screen or case. Avoid allowing any water or liquid from entering the LCD TV or accessories. Cleaner Use water or non-ammonia/non-alcohol based glass cleaner. [. . . ] There may be reflected electric waves from mountains or buildings. The picture is spotted. There may be interference from automobiles, trains, high voltage lines, neon light, etc. There may be interference between the antenna cable and power cable. Try to pull them further apart. 18 When there are stripes on the screen or colors fade. Is the unit receiving interference from other devices? [. . . ]