User manual CURTIS SRS36

[. . . ] 6 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Cordless Telephone Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Preparing for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Placing Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For best performance, clean the CHARGE TERMINALS periodically with a damp cloth. CHARGE/IN USE LED Indicator: (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging. (IN USE) Lights up to indicate that the HANDSET is in TALK mode. 6 Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Check to be sure you have all items that come with this cordless telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, TELEPHONE LINE CORD, BELT CLIP, and Owner's Manual. 58 GHz 58 GHz In Use Low Batt. Cordless Phone PAGE REDIAL PAUSE CH VOL MUTE BELT CLIP BATTERY PACK MEMO FLASH TALK ABC DEF 1 GHI 2 JKL 3 MNO 4 PRS 5 TUV 6 WXY 7 8 OPER 9 # chg/ in use * 0 HANDSET BASE UNIT TELEPHONE LINE CORD AC ADAPTOR 3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION JACK at the back of the BASE UNIT. Plug the AC ADAPTOR into a 120V AC wall outlet. USE ONLY WITH CLASS 2 POWER SOURCE 12V DC, 200mA. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT. Be sure the BASE UNIT IN USE LED indicator is off and the HANDSET is in STANDBY mode. Dial the TELEPHONE KEYPAD 0~9 button where you want to store that number. You will hear one confirmation "beep. " 6. Repeat steps 1 through 5 to store other telephone numbers. VOL 10 Cordless Telephone Operation EXAMPLE : To store the number 115-1968 under the TELEPHONE KEYPAD 1 button: 1 - Press the MEMO button. A total of 10 telephone numbers can be programmed in memory. IMPORTANT: The maximum number of digits that can be stored for any phone number is 16 in PULSE or TONE mode. The maximum number of digits for mixed (TONE and PULSE in combination) dialing is 15. If you are using a switchboard system to access an outside line (such as an 8 or 9), press the PAUSE button to store a PAUSE. 4 - Press the TELEPHONE KEYPAD 1 button. 5 - You have stored 115-1968 under TELEPHONE KEYPAD 1 button. Recalling Stored Numbers from Memory 1. Press the TELEPHONE KEYPAD button for the number you have stored. [. . . ] In most areas, but not all, the sum of the RENs for all devices connected to one line should not exceed five (5. 0). To be certain of the number of devices that you may connect to your line, you should contact your local telephone company. If your telephone causes harm to the telephone network, the telephone company may temporarily disconnect your service. If possible, they will notify you in advance that temporary discontinuance of service may be required. [. . . ]