User manual CURTIS TCR4964

[. . . ] WARNING To prevent fire or shock hazard, Do not use this plug with an extension cord, Receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. Do not expose this appliance to rain or moisture. To prevent electrical shock, Match wide blade plug to wide slot fully insert. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT OPEN The lightning flash with arroWarning : To reduce the risk of whead symbol, within an equelectric shock, do not remove ilateral triangle is intended to cover (or back), no user servicalert the user to the presence eable parts inside. Refer serviof uninsulated' dangerous vo- cing to qualified service persltage' within the product's enonnel. [. . . ] Do not stick paper or write anything with a ballpoint pen on the label side of the disc. LOADING AND UNLOADING COMPACT DISCS LOADING AND UNLOADING COMPACT DISCS m Press the Standy/on/Alarm/off button to turn the unit on. m Press the Buzzer/Tuner/CD button to the CD position. m Press the right side of the CD door, labelled PUSH OPEN/CLOSE to open the CD compartment. m When the disc compartment has opened, insert the disc with the label side facing up. Push down in the centre until disc is locked in place. m Close the disc compartment by pressing the PUSH OPEN/CLOSE. When the compartment is fully closed, the disc will start turning automatically. The total number of tracks will appear in the display. m The disc compartment may be opened at any time by first pressing the stop button and then pressing the PUSH OPEN/CLOSE. Remove the CD only after the compartment has fully opened. CAUTION Do not put anything except a compact disc into the compartment. Foreign objects can damage the mechanism. Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism. Never place more than one disc into the disc compartment at any time. If the disc is correctly loaded, the total number of tracks on the disc will be displayed: 6 Notes:After the disc compartment is fully closed, the disc information may not appear on the display. This means that the disc is improperly loaded (most likely it is upside down). To check, open the disc compartment again and reload the disc. DISC PLAY m Insert a CD as described in the previous section and close the disc compartment. m The display will then show the total number of tracks. m Press the PLAY/PAUSE button to start playback. To skip backward or forward through the tracks on the disc, press the or buttons. m When the disc is through playing, it will stop. Press STOP button to stop disc before it is finished. [. . . ] m While the unit is on , press the SLEEP button on the unit the display will show 90 and SLEEP Indicator lights on. m Successive pressing of the SLEEP button reduces the time by 90/60/30/15 with each press. For example if you want the system to switch off in 30 minutes press the SLEEP button three times. m Afer approximately five seconds the sleep function is registered. [. . . ]