User manual CURTIS TID2817

[. . . ] SKIP / SEARCH UP BUTTON SKIP / SEARCH DOWN BUTTON PLAY / PAUSE BUTTON STOP BUTTON REPEAT BUTTON PROGRAM BUTTON PHONES JACK BUTTON LCD DISPLAY WINDOW POWER BUTTON MUTE BUTTON IR SENSOR TUNING KNOB CD DOOR AM / FM / FM. ST SWITCH CD / RADIO SWITCH VOLUME UP / DOWN BUTTON CD DOOR OPEN BUTTON 18. X-BASS ON / OFF SWITCH SPEAKER TERMINALS FM ANTENNA SUBWOOFER LINE-OUT AC POWER MAIN SWITCH 110V / 220V DUAL VOLTAGE (OPTIONAL) AC CORD SPEAKER SUBWOOFER VOLUME UP / DOWN BUTTON SUBWOOFER POWER ON / OFF BUTTON SUBWOOFER LINE-OUT JACK DUAL VOLTAGE SWITCH SUBWOOFER POWER STANDBY INDICATOR REMOTE CONTROL 1. POWER BUTTON PLAY / PAUSE BUTTON STOP BUTTON SKIP / SEARCH DOWN / UP BUTTON REPEAT BUTTON RANDOM BUTTON MUTE BUTTON VOLUME DOWN / UP BUTTON BATTERY DOOR Press down of the compartment cover, and slide the cover off open the compartment. Place the two ( UM3 ), ( AA ), (R6 ) batteries in the remote control according to the polarity markings ("+" and "--') inside the compartment and on the batteries. [. . . ] NOTE : Replace all batteries at the same time. Remove the batteries the remote control is not in use for long periods, don't mix normal batteries with rechargeable batteries, when the batteries become weak, remote control will be not functioned, replace with new batteries if above happened. UK - 4 PUTTING THE BATTERIES INTO THE REMOTE CONTROL UNIT ** BATTERIES NOT INCLUDED ** INSTALLING THE SPEAKER WIRE TO THE SPEAKER TERMINALS 1. Speakers Connection Extend the SPEAKER WIRES and connect them to the SPEAKER TERMINALS. Power Cord Connection Before using, connect the AC Power Cord to the AC outlet, then turn on the main switch of the unit. INSTALLING THE SUBWOOFER WIRE TO THE SBB LINE IN TERMINALS 1. Subwoofer Connection Extend the SUBWOODFER WIRE and connect it to the SBB LINE IN TERMINAL. 2. Power Cord Connection Before using, connect the AC Power Cord to the AC outlet, then turn on the main switch of the SUBWOOFER. OPERATING THE UNIT When you first plug the unit into the AC outlet, the unit will be in standby mode. You can press the POWER button on the unit (or on the remote control) to switch the unit ON and OFF. Pull the AC plug out of the wall socket if you want to switch off completely. ADJUSTING THE SOUND Press the volume +/- buttons to set the sound level. For increased bass at all volume levels, switch the BASS SWITCH on to boost the low frequency sound. To mute the sound, press MUTE button and the "POWER" indicator will flash. To resume the sound, press the MUTE button again or just press the volume +/- button to disable the MUTE function. A stereo headphone jack is provided for private listening. Open the CD door on the unit to remove the CD. 5. 6. 7. Up to 20 tunes can be programmed for listening and played. Select the desired track number using the SKIP/SEARCH button on the unit (or remote). (F. 2) 3. Press the PROG button to memories the track selection. Repeat steps 1 and 3 as to memories up to 20 tracks. Opening the door clears all programmes. PROGRAMMED PLAYBACK (F. 1) Press PLAY / PAUSE button, to play starts with the first track of the program. (F. 2) RANDOM PLAY (for Remote Handset) 1. Press the RANDOM button once, and the "RANDOM" indicator will light up. Press the PLAY / PAUSE button to start playing. To cancel random play, either press the STOP button twice or press the RANDOM button once again, until the "RANDOM" indicator disappeared. REPEAT PLAY 1. When playing CD, If repeat the same track only, press the REPEAT button once and the "REPEAT" indicator will light up and flash. If you desire to repeat all, press REPEAT button twice and the "REPEAT" indicator will light up and not flash. [. . . ] To cancel repeat play, press the STOP button twice until the repeat indicator disappeared. UK - 6 COMPACT DISC 1. Always use a compact discs bearing the mark as shown. 2. Notes on handling discs Removing the disc from its storage case and loading it. * Do not touch the reflective recorded surface. * Do not stick paper or write anything on the surface. [. . . ]