Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CUSCRAFT 13B2N. We hope that this CUSCRAFT 13B2N user guide will be useful to you.
Lastmanuals help download the user guide CUSCRAFT 13B2N.
Detailed instructions for use are in the User's Guide.
[. . . ] Each antenna is weighed at the factory to verify the parts count. If you claim a missing part, you will be asked for the weight verification label.
PLANNING
Plan your installation carefully. If you use volunteer helpers be sure that they are qualified to assist you. [. . . ] Cushcraft offers several different models, such as LAC-1, LAC-2 and the LAC-4 series .
ASSEMBLY
Assemble your antenna by following the directions and illustrations in steps 1 through 6. After the antenna is completely assembled, verify dimensions and element spacings for accuracy. Then, return to the section below for final tuning.
TUNING PROCEDURE
The 13B2N does not normally require tuning after assembly. However, if you wish to check the VSWR before installation, please observe the following procedures. To prevent detuning the antenna, it should be tuned in place or at least 7 feet (2. 13 meters) above ground and clear of surrounding objects. Keep all metal obstructions such as guy wires and other antennas at least 10 feet (3. 05 m) away since they will nullify any adjustment and degraded performance will result. Run the coax cable from your transmitter to the area in which the antenna is going to be tested. The length of this cable or your feedline is not critical. Connect a good quality VSWR bridge to the end of this cable. (305 cm) or less] from the VSWR bridge to the antenna. Set the transmitter to your center operating frequency. When you read VSWR, be sure you move far enough away from the antenna so that your body does not effect the reading. If it is high, move both T-Match straps (125) by 1/4" (. 6 cm) either inward or outward and check the VSWR. Both T-match straps should be the same distance from the center of the driven element. If the VSWR improved, then continue moving the T-Match straps in the same direction. If the VSWR deteriorated then move the T-Match straps in the opposite direction. Repeat this procedure until no further improvement can be made. Then tighten all connections on the T-Match driven element assembly. [. . . ] Secure with lock washers (119) and nut (118) in that order. Affix the warning label (326) to the boom as shown in figure E. This warranty is in lieu of all other expressed warranties, any implied warranty is limited in duration to one year. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CUSCRAFT 13B2N
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CUSCRAFT 13B2N will begin.
