User manual CYBERPOWER CPS325SL

[. . . ] User Manual for: CPS325SL and PowerPanelTM Software ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT: http://www. cyberpowersystems. com/FAQs. htm TABLE OF CONTENTS Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Determining Power Requirements. . . . . 1 Hardware Installation Guide. . . . . . . . . . . . . 2 Software Installation Guide. . . . . . . . . . . . . . 3 Software User Manual. . . . . . . . . . . . . . . . . . . . 4 LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . 8 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Battery Replacement Instructions. . . . . . . . . . . 9 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Thank you for purchasing a CyberPower Systems Product. To enjoy all the features and benefits of this Uninterruptible Power System (UPS), please read and follow all installation and operation instructions completely. This UPS is designed to provide guaranteed power protection for connected electronic equipment. [. . . ] Unplug the UPS from the AC outlet. When a power failure occurs, PowerPanelTM will appear on the screen. The outlet and battery symbols will change to indicate a power failure. The countdown timer will move towards zero. When the timer reaches zero, the software will begin to save and close any open applications. The software will auto-assign names to any files that have not been previously saved, and then save the file to the PCTemp folder which is located in the root directory of your C drive (where C is the name of your main hard drive). Once all open files have been saved and closed, PowerPanelTM will shutdown the operating system. Once the operating system is shutdown, the UPS will turn off within 90 seconds. Wait until the UPS has turned off before plugging the UPS back into the outlet. Once the test has been completed, plug the UPS back into the wall and turn it back on. Please allow 4 hours for the UPS to recharge before attempting another self-test. Unplug the UPS from the wall to simulate a power failure. The UPS will begin beeping, indicating a power failure. Once the computer system is shutdown, turn the UPS off. As the battery discharges, the unit will beep more rapidly, indicating that the battery is nearing discharge. Once the test is complete, plug the UPS back in and start your computer. Please allow 4 hours for the UPS to recharge before attempting another self-test. 6 CPS325SL Guaranteed Uninterruptible Power System DEFINITIONS FOR ILLUMINATED LED INDICATORS CONDITION On Off Off Two Beeps Off Rapid Beeps Two Beeps or Rapid Beeps Off Off Long Beep On/Off None Utility Failure- the UPS is providing power to battery power-supplied outlets from its battery. Utility Failure- The UPS is providing battery power. Rapid beeps indicate the unit will run out of power shortly. System Overload- Occurs when connected equipment exceeds the rating of unit. Turn the UPS off, unplug at least one piece of equipment, wait 10 seconds, reset the circuit breaker and turn the unit on. Battery Overload- Occurs when connected equipment exceeds the rating of battery outlets of the unit. Turn the UPS off, unplug at least one piece of equipment from battery outlets, wait 10 seconds, reset the circuit breaker and turn the unit on. Electrical Wiring Fault- This indicates a wiring problem with the AC outlet such as bad ground, miss ground, or reversed wiring. [. . . ] NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. 12 CPS325SL Guaranteed Uninterruptible Power System DO NOT USE FOR MEDICAL OR LIFE SUPPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES. CyberPower does not sell the Products for use in high-risk activities. The Product is not designed or intended for use in hazardous environments requiring fail-safe performance, including the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems, life support or medical applications or for use in any circumstance in which the failure of the Product could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities. CyberPower does not authorize use of any of its products use in any High Risk Activities. [. . . ]