User manual CYBEX INTERNATIONAL 12170 GLUTE

[. . . ] Part Number 12170-999-4 J Cybex VR3® Glute Owner's Manual Strength Systems www. cybexinternational. com Part Number 12170-999-4 J Cybex VR3® Glute Owner's Manual Strength Systems Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. VR3® and its mark are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. , makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. © Copyright 2010, Cybex International, Inc. [. . . ] Failure to do so will result in the carriers refusal to honor your damage claim. The carrier will provide you with the required forms for filing such claims. Concealed Damage - Damage not seen with a visual check upon receipt of a shipment but notices later must be reported to the carrier as soon as possible. Upon discovery of the damage, a written or phone request to the carrier asking them to perform an inspection of the materials must be made within ten days of the delivery date. Keep all shipping containers and packing materials as they will be needed in the inspection process. The carrier will provide you with an inspection report and the necessary forms for filing a concealed damage claim. Concealed damage claim is the carrier's responsibility. Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA and an Automated Return Service (ARS) label. Customer Service Page 3-2 Cybex VR3 12170 Glute Owner's Manual 4 - Assembly TOOLS REQUIRED · · · · · 7/32" Allen wrench 1/8" Allen wrench Medium weight automotive engine oil Torque wrench 3/4" Wrench ITEM 1 2 3 QTY 5 1 14 PART NO. 12090-322 12000-560 4000C101 DESCRIPTION FOOT PAD DECAL, WEIGHT PLATE (30 - 290) WEIGHT STACK PLATE 3 1 2 30 50 70 90 110 130 150 170 190 210 230 250 270 290 13. 5 22. 5 31. 5 40. 5 49. 5 58. 5 67. 5 76. 5 85. 5 94. 5 103. 5 112. 5 121. 5 130. 5 NOTE: Two people will be required for this procedure. NOTE: It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each machine to allow for safe use and passage. Read and understand all instructions thoroughly before starting any of the procedures listed on this instruction sheet. erifyyouhavereceivedtheappropriateconfiguration. Verify that you received the correct color machine that you ordered. Verify you received the proper weight stack. Verify you received the appropriate owner's manual. Verify you received the weight stack decals. Remove shipping feet. WARNING: Use extreme caution when removing shipping cones and installing feet. Failure to do so could result in injury. With an assistant, carefully remove each (standard) cone-shaped shipping support using a 3/4" socket or wrench. Carefully place rubber feet (supplied with machine) on each foot of the frame. If weight stack is already installed, proceed to step 9. Using a 1/8" Allen wrench, remove the two Button Head Socket Cap Screws (BHSCS) securing the bottom bracket to the frame. [. . . ] See Figure 3. Figure 3. · "Necking", a stretched cable sheath. See Figure 4. Figure 4. Maintenance Page 5-5 Cybex VR3 12170 Glute Owner's Manual 4. Inspect bars and handles for wear, paying particular attention to tab area connecting points. Inspect snap links for proper latching (indicates wear). [. . . ]