User manual CYBEX INTERNATIONAL 16101 OVERHEAD PRESS

[. . . ] Cybex® Plate Loaded Overhead Press Owner's and Service Manual Strength Systems Part Number 16101-999-4 A www. cybexinternational. com Cybex® Plate Loaded Overhead Press Owner's and Service Manual Strength Systems Part Number 16101-999-4 A Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. , makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. © Copyright 2010, Cybex International, Inc. Printed in the United States of America. [. . . ] Caution Decal. . . . . . . . . . . . . . . . . . . . 4520-362 C. Caution Decal. . . . . . . . . . . . . . . . . . . . 4000Y316 D. Warning Decal. . . . . . . . . . . . . . . . . . . . 5220-337 B C CAUTION CAUTION Personal injury may occur. Keep away from moving parts to avoid injury. 4000Y316-4 A D Page 3 Cybex Plate Loaded 16101 Overhead Press Owner's Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of this equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. WARNING: Equipment found to have worn or damaged components must be removed from service until repair(s) is made. Failure to do so could result in injury. Inspect all nuts and bolts for looseness. Check for worn handles, and worn warning labeling. Replace all worn parts immediately. 2 - Exercise Intended Use The intended use of this equipment is to aid or improve general physical fitness and exercise. For Comercial use. Instructions Read and understand all instructions and warnings prior to using this machine. See Chapter 1, Safety in Owner's Manual or consult with floor staff. MUSCLES USED Anterior Deltoid, Middle Deltoid, Triceps NOTE: Motions Developed: Shoulder Abduction, Elbow Extension NOTE: Refer to next page for set up and movement Page 4 Cybex Plate Loaded 16101 Overhead Press Owner's Manual Set Up 1. Load evenly with appropriate resistance. Adjust seat height so handles are level with top of shoulders. Push handles upward until arms are fully straightened. 3 - Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 to 6:00 p. m Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. Find information on the web at www. cybexintl. com or e-mail at techhelp@cybexintl. com. Ordering Parts Fax orders to 508-533-5183. To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). You may also contact us through e-mail at techhelp@cybexintl. com Having the following information ready when calling will assist our Cybex representatives in serving you. · · Unit Serial Number Product Name The unit serial number and product name can be found on the serial number decal. See Chapter 6 for exact location of serial number decal. [. . . ] Shim any leg or frame not in contact with surface using flat washers. Verify proper operation. 5 - Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines. [. . . ]