User manual CYBEX INTERNATIONAL 16211 SEATED CALF

[. . . ] Cybex 16211 Seated Calf Owners Manual Strength Systems Part Number 16221-999-4 www. cybexintl. com Table of Contents Safety Safety . 3 5 7 8 9 Assembly Machine Specifications. . 11 Maintenance Daily Procedures . 14 Customer Service Product Registration . [. . . ] The machine has holes in the feet, which allow for ease in anchoring to the floor. All anchoring holes must be used to maximize stability. Cybex strongly recommends equipment be secured to a solid, level surface to eliminate rocking, tipping, or falling over due to incorrect usage and misuse. The solid, level surface should not deviate more than 1/8" over a 10' distance or as defined and required by local building and architectural codes. Anchoring of equipment must be completed by a qualified licensed contractor. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the equipment to the floor. Due to the wide variation of flooring on which machines may be anchored or installed, verify anchoring method and anchoring fasteners with a qualified and licensed contractor. A minimum pull out force of 220 lbs/100 kgs is required for each anchor position. PROPER USAGE Use machine only as described in the manual. Failing to follow proper instructions may result in injury. WARNING: Serious injury or death could occur if the following warnings are not enforced: DO NOT Lean Against or Pull On the framework, weight stack, or any component, whether machine is at rest or in use. Inappropriate or improper use may result in injury to users or third parties (bystanders) STANDARD COMPLIANCE Cybex products meets applicable ASTM and EN Standards. 6 Cybex 16211 Seated Calf Owner's Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal and safe operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in the Maintenance section of this manual. Briefly, they include: Daily · Clean upholstery. Tighten as required. · Inspect · Inspect · Check all cables and belts for damage or wear. If a cable or belt is worn or damaged, immediately discontinue use until cable or belt has been replaced. for worn handles, worn snap links, and worn warning labeling. Replace all loose or worn grips immediately. · Inspect · Inspect weight stacks for proper alignment and operation. Correct all improper alignment and operation issues immediately. guide rods using automotive engine oil only. · Lubricate Yearly Replace all cables and belts at least annually. 7 Cybex 16211 Seated Calf Owner's Manual Warnings and Cautions Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury. [. . . ] 5 5 0 6 0 1-888-462-9239 5, 628, 715 5, 722, 921 6, 743, 158 7, 338, 415 D481, 428 D490, 128 D491, 238 7, 727, 128 5, 643, 152 5, 620, 402 7, 179, 209 7, 503, 882 D486, 535 D490, 865 D497, 190 7, 717, 831 5, 616, 107 6, 488, 612 7, 335, 139 D480, 773 D490, 127 D491, 237 6, 033, 350 · · · Part Description and Part Number if you have it. All parts can be found on the web at www. cybexintl. com Shipping Address Contact Name In addition to your shipping address and contact name, your account number is helpful but not required. You may also fax orders to 508-533-5183. Return Material Authorization (RMA) MATERIAL: The Return Material Authorization (RMA) system is used when returning materialEXCEPT AS NOTED for placement, DIMENSIONS REMOVE repair or credit. The system assures that returned materials are properly handled and analyzed. [. . . ]