User manual CYBEX INTERNATIONAL JUNGLE GYM 17150 DIP CHIN AND TOWER

[. . . ] Jungle Gym® Dip Chin Tower Owner's Manual Strength Systems Part Number 17150-999-4 www. cybexintl. com Table of Contents Safety Safety Guidelines And Practices . 3 6 7 8 9 Assembly Machine Specifications. . 18 21 23 24 25 Customer Service Product Registration . . 26 26 27 28 28 Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. [. . . ] Inspect weight stacks for proper alignment and operation. Correct all improper alignment and operation issues immediately. Lubricate guide rods using automotive engine oil only. Yearly Replace all cables and belts at least annually. 7 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual Warnings and Cautions Warning decals indicate a potentially hazardous situation that could result in death or serious injury if the precautions are not observed. Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury. The diagram following the decals show where each decal is located. Keep away from moving parts to avoid injury. 12 PT ARIAL FONT 4000Y316-4 A R . 25 4 PLACES 2. Humidity The unit is designed to function normally in an environment with a relative humidity range of 30% to 75%. The unit can be shipped and stored in an environment with a relative humidity range of 10% to 90%. Temperature The unit is designed to function normally in an environment with an ambient temperature range of 50° F (10° C) to 104° F (40° C). The unit can be shipped and stored in an environment with a relative humidity range of 10% to 90%. Do not install, use, or store the unit in an area of high humidity, such as near a steam room, sauna, indoor pool or outdoors. Extensive exposure to water vapor, chlorine and/or bromine could adversely affect the equipment. Assembly Procedures Two people will be required for this procedure. Read and understand all instructions thoroughly before assembling this unit. If there is damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts. 10 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual Tools Required Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each machine to allow for safe use and passage. 1 2 3/4" 5/16" 7/32" 9/16" 11 3 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual 4 12 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual 13 5 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual 14 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual 15 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual Exercise Intended Use The intended commercial use of this machine is to aid exercise and improve general physical fitness. Instructions Read and understand all instructions and warnings prior to using this machine in the Safety section of the Owner's Manual. All adjustment points on the machine have yellow handles or knobs. NOTE: If assist is not desired, lift foot bar up. Lift/lower body in smooth controlled movements. CAUTION: Serious injury can result if precautions are not followed. Use equipment only as described in placards located on each machine. Failure to use in the manner depicted can result in injury. 16 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual DIP CHIN START/FINISH DIP START/FINISH CHIN UP Motions Developed Dip - Shoulder Flexion, Adduction Elbow Extension Chin Up - Shoulder Adduction and Elbow Flexion Muscles Used Dip - Pectoralis, Anterior Deltoid, Triceps Chin Up - Latissimus Dorsi, Teres Major, Biceps, Lower Trapezius, Rhomboid 17 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. Cybex is not responsible for performing regular inspection and maintenance actions for your machines. [. . . ] All parts can be found on the web at www. cybexintl. com Shipping Address Contact Name Include a description of the problem. In addition to your shipping address and contact name, your account number is helpful but not required. You may also fax orders to 508-533-5183. MATERIAL: DIMENSIONS IN INCHES ALL MATERIAL MUST COMPLY TO EUROPEAN UNION DIRECTIVE 2002/95/EC RoHS (RESTRICTION OF HAZARDOUS SUBSTANCES) FINISH: EXCEPT AS NOTED REMOVE ALL BURRS BREAK SHARP EDGES . 005/. 010 R SURFACE FINISH INDICATED PER ANSI B46. 1-1985 GENERAL TOLERANCES: 2 DECIMALS ± . 03 3 DECIMALS ± . 015 ANGLES ± 1° FEATURES SHOWN PERPENDICULAR OR PARALLEL SHALL BE SO WITHIN ± 1° REMOVE CARBURIZATIO AND SCALE FROM LASE AND PLASMA CUT EDGE GENERAL MACHINING 125 27 Cybex Jungle Gym 17150 Dip Chin Tower Owner's Manual Return Material Authorization (RMA) The Return Material Authorization (RMA) system is used when returning material for placement, repair or credit. The system assures that returned materials are properly handled and analyzed. Follow the following procedures carefully. [. . . ]