User manual CYBEX INTERNATIONAL 750T TREADMILL

[. . . ] Cybex 750T Treadmill Product Number 751T Owner's Manual Cardiovascular Systems Part Number LT-20406-4 J www. cybexinternational. com Cybex 750T Treadmill Product Number 751T Owner's Manual Cardiovascular Systems Part Number LT-20406-4 J Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. Safety SentryTM is a registered trademark of Cybex International, Inc. Polar® is a registered trademark of Polar Electro Inc. makes no representations or warranties regarding the contents of this manual. [. . . ] In a program the belt will begin accelerating and the incline will change to the corresponding speed and incline of the program and level you selected. Hold the handrails while you step onto the running belt and begin walking. The top center Bar Graph display shows a graphical representation of the relative incline changes, and if in a program, will show the relative intensity changes that are coming up. The Text Area will start showing the workout data such as Distance, Calories, Heart rate (if available), METs and Pace (Minutes per Mile or Minutes per Km). The data displays will start by automatically shifting every five seconds. To hold on one display, press the Shift/Scan key. To continue auto-scan, hold the Shift/Scan key for 3 seconds until it beeps. NOTE: Heart rate will be displayed in lieu of METs if a valid heart rate is available from a wireless chest strap (not included) or by holding the contact heart rate grips. NOTE: When you adjust incline in a program, the change will affect only the current segment. The program control will resume starting with the next segment. To increase or decrease overall intensity, adjust the speed and/or the program level. Press the Speed + ­ keys to change the belt speed at any time. The right display will show the set speed. The left display will show the current 10. Press the Incline incline only when incline keys are used, then revert to time. Press the Stop key at any time to stop the workout. Press Stop once to end the workout and begin the Workout Review. As you press Stop once, the treadmill belt will stop. Press Stop a second time to clear the Workout Review, return to Dormant Mode and return incline to 0%. If the e-stop key is removed during a workout, the drive motor power shuts off immediately, causing the belt to stop. "EMERGENGY STOP" is displayed, followed by "REPLACE E-STOP KEY TO CONTINUE". Replacement of the e-stop key causes Workout Review to begin. [. . . ] Attn: Customer Service Department Cybex International, Inc. 10 Trotter Drive Medway, MA 02053 NOTE: Merchandise returned without an RMA number on the outside of the package or shipments sent C. O. D. will not be accepted by the Cybex receiving department. Damaged Parts Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier (UPS, Federal Express, trucking companies, etc. ). [. . . ]