User manual CYBEX INTERNATIONAL FT-325

[. . . ] Cybex FT-325 Owners Manual and Service Manual Strength Systems Part Number 18000-999-4 A www. cybexintl. com Table of Contents Safety Safety . 3 5 7 8 9 Assembly Machine Specifications. . 19 22 24 25 26 26 Customer Service Product Registration . . 27 27 27 28 29 Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. [. . . ] Move pulley and cable connection out of the way. Guide rod cap contains a compression spring that will fly if grasp is not released slowly. Slide spring loaded guide rod cap down guide rod until cap is clear of frame. Slowly release grasp of guide rod cap and remove. Remove plastic insert plug, located at top of machine. Plastic Insert plug 12 Cybex FT-325 Owner's Manual If Then 11. Loosen the two button head socket cap screws (BHSCS) securing chin up bar to frame using a 7/32" Allen wrench. BHSCS FT-325cannotfit through doorway 12. Hold thread block in place with fingers and remove the BHSCS. Thread block 13 Cybex FT-325 Owner's Manual If Then 13. Remove BHSCS and locknuts, remove one side of connector tubes using a 7/32" Allen wrench and a 9/16 wrench. Tube connector FT-325cannotfit through doorway 14. Reattach frame halves and securely tighten the BHSCS. Place two drops of Loctite 242 to each BHSCS and threaded hole for Chin up bar. Insert plastic plugs. Securelyanchormachinetothefloor Cybex strongly recommends to maximize stability, equipment must be secured to a solid level surface. CAUTION: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. . WARNING: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8'' grade 2 bolts or better). WARNING: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or frame not in contact with surface using flat washers. 14 Cybex FT-325 Owner's Manual Install individual weight plates one at at time 1. Position each weight plate so wide edges of bushings face upward and narrow edges of bushings face downward. RE COR CT WRO NG Wide bushing edge faces upward 2. Cable routing The narrow bushing edge must face downward. 1. Position pulley mount parallel to the top weight. [. . . ] 5 5 0 6 0 1-888-462-9239 5, 628, 715 5, 722, 921 6, 743, 158 7, 338, 415 D481, 428 D490, 128 D491, 238 7, 727, 128 5, 643, 152 5, 620, 402 7, 179, 209 7, 503, 882 D486, 535 D490, 865 D497, 190 7, 717, 831 5, 616, 107 6, 488, 612 7, 335, 139 D480, 773 D490, 127 D491, 237 6, 033, 350 · · · Part Description and Part Number if you have it. All parts can be found on the web at www. cybexintl. com Shipping Address Contact Name In addition to your shipping address and contact name, your account number is helpful but not required. You may also fax orders to 508-533-5183. Return Material Authorization (RMA) MATERIAL: The Return Material Authorization (RMA) system is used when returning materialEXCEPT AS NOTED for placement, DIMENSIONS REMOVE repair or credit. The system assures that returned materials are properly handled and analyzed. [. . . ]