User manual CYBEX S-FIX SCUDERIA FERRARI VICTORY

[. . . ] Without the approval of the certification office, the child seat may not be modified or added to in any way. Repairs may only be performed by person authorised to this effect. Only original parts and accessories may be used for repairs. Failure to comply with the above will result in the protective function of the child seat no longer being guaranteed. [. . . ] € Push the two locking arms (8) into the ISOFIX guides (7) until these lock into place in the ISOFIX locking arms with an audible ‘click’. € Ensure that the seat is secure by trying to pull it out of the ISOFIX guides (7). € The green safety indicator (11) must now be clearly visible on the two grey release buttons (10). € You can now use the ISOFIX adjustment lever (9) under the booster seat (1) of the CYBEX SOLUTION S-FIX child seat to adjust the position. Note the information in the section “Placing the seat in the vehicle”. When using the child seat on a middle position in the vehicle, it‘s prohibited to fold out the L. Device for carrying or climbing into the child seat is prohibited. REMOVAL OF THE CYBEX SOLUTION S-FIX Perform the installation steps in the reverse order. € Unlock the ISOFIX Connect locking arms (5) on both sides by pushing the grey release buttons (10) and pulling them back simultaneously. € Pull the seat out of the ISOFIX guides (7). € Rotate the ISOFIX Connect locking arms (5) 180°. € Operate the ISOFIX adjustment lever (9) on the axis (4) of the CYBEX SOLUTION S-FIX and push the locking arms in as far as they will go. By folding in the ISOFIX Connect locking arms (5), you are not just protecting the vehicle seat but also the locking arms of the ISOFIX Connect system from dirt and damage. ADAPTING TO BODY SIZE • The seat can then be adjusted to your child’s body simply by using the adjustable headrest (12). To do this, pull the adjustment lever (13) upwards to unlock the headrest (12). € Adjust the headrest so that there is at maximum 2cm gap (approximately two fingers) between the child’s shoulder and the lower edge of the headrest. Only an optimally adjusted headrest (12) can offer your child maximum protection and comfort while ensuring that the diagonal belt (6) can be fitted smoothly. The height of the CYBEX SOLUTION S-FIX can be adjusted to one of twelve positions. Touches the door, it ought to be stored away properly. It‘s allowed to be used in this position. Slightly and fold it, until it locks with an audible “CLICK”. EN The child seat is equipped with the “Linear Side-impact Protection“ system (L. [. . . ] Gradual wear of the plastic, for example caused by exposure to sunlight (UV), can cause slight deterioration of the product’s properties. Since very high temperature fluctuations and other unforeseeable stresses are common in vehicles, it is necessary to observe the following points: • If the vehicle is directly exposed to strong sunlight for long periods, the child seat must be removed from the vehicle or covered with a light cloth. € Check all plastic and metal parts of the seat regularly for damage or change of shape or colour. If you notice any change in the child seat, the seat must be disposed or checked and possibly replaced by the manufacturer. [. . . ]