User manual CYBEX SIRONA PLUS

[. . . ] The following short instruction is intended to provide an overview only. In order to achieve maximum security and comfort for your child it is absolutely imperative that you read the whole instruction manual carefully. For proper protection of your child, it is essential to use and install the car seat according to the instructions given in this manual. According to local codes the product characteristic can be different. [. . . ] It‘s allowed to be used in this position. Slightly and fold it, until it locks with an audible "CLICK". When using the car seat on a middle position in the vehicle, it‘s prohibited to fold out the (L. Device for carrying or climbing into the car seat is prohibited. The headrest ensures the best possible protection for your child only if it is adjusted to the optimum height. There are 12 height positions that can be set. €• The headrest must be adjusted so that max. Two finger’s width or less remains free between the child’s shoulder and the headrest. €• Activate the adjustable handle (13) on the bottom side of the headrest (14) and move it into the required position. The shoulder belts (15) are firmly connected to the headrest and do not have to be adjusted separately. The indicator on the headrest (1) shows the height of the child from which the seat is recommended for forward facing use at the earliest. The car seat can be used in rearward-facing position up to 105 cm. The integrated Driving Direction Control Technology in the car seat prevents the usage of seat in forward-facing position till 6th headrest position. The seat may only be used forward-facing, if: •• the child is > 76 cm tall. €• the correctly adjusted headrest (14) covers the indicator (1). €• the headrest is at 7th or higher position. 30 The car seat can be rotated 360°, in order to help to put your child into and take your child out of the vehicle. This also allows you to change the position of the seat from rearward-facing to forward-facing. €• In order to be able to rotate the seat shell (16), you must first press the position adjustment handle (11) and while keeping the handle pressed, bring the seat shell into a completely upright position. Only when the car seat is in most upright position and the indicator (17) shows RED, the car seat can be rotated. €• Now you can rotate the seat shell (16) towards the door and strap the child in without difficulty. Before starting your journey you must return the seat shell (16) to a defined travel position locked in place. [. . . ] 45 IT EN To guarantee that your car seat provides the maximum protection, it is essential to comply with the following points: Perchè il seggiolino continui ad offrire la massima protezione è necessario tenere presente quanto segue: DE PRODUCT CARE CURA DEL PRODOTTO PRODUKTINFORMATION Bei Fragen wenden Sie sich zuerst an Ihren Händler. 46 •• Serial number (see sticker) •• Make and model of the vehicle and the position of the vehicle seat on which the car seat is used •• Weight, age and height of the child Further information about our products can be found at www. PRODUCT DURABILITY The car seat is designed to meet its specifications for the entire service life of approximately 4 years. However, as there can be very large temperature fluctuations and unpredictable strains in vehicles, the following points must be observed: •• If the vehicle is directly exposed to sunlight for a longer time, the child car seat must be removed from the vehicle or covered with a light cloth. [. . . ]