User manual D-LINK AIRPLUS G DI-524

[. . . ] Note: Using a power supply with a different voltage rating than the one included with the DI-524 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Ethernet-Based Cable or DSL Modem Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter Internet Explorer Version 6. 11g highperformance, wireless router that supports high-speed wireless networking at home, at work or in public places. [. . . ] From the Security tab, click the button to restore the settings to their defaults. Go to the Advanced tab and click the button to restore these settings to their defaults Click OK. Your computer must have an IP Address in the same range of the device you are attempting to configure. Step 1 Click on Start, then click on Run. step 2 The Run Dialogue Box will appear. Type winipcfg in the window as shown then click OK. Step 3 The IP Configuration window will appear, displaying your Ethernet Adapter Information. Select your adapter from the drop down menu. If you do not see your adapter in the drop down menu, your adapter is Step 4 After selecting your adapter, it will display your IP Address, subnet mask, and default gateway. Step 5 Click OK to close the IP Configuration window Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Step 3 From the Command Prompt, enter ipconfig. Step 4 Type exit to close the command prompt. Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Make sure you take note of your computer´s Default Gateway IP Address. Step 2 See Step 2 for Windows 2000 and continue from there. Step 2 Right-click on the Local Area Connection which represents your network card and select Properties. Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router. Make sure that the number you choose is not in use on the network. Set the Primary DNS to be the same as the LAN IP address of your router (192. The Secondary DNS is not needed or enter a DNS server from your ISP. [. . . ] Ca for detailed warranty information within Canada) D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link's reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link's judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty. [. . . ]