User manual D-LINK AIRPLUS G DWL-G700AP ACCESS POINT

[. . . ] DWL-700AP User's Manual Table of Contents Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wireless Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next. D-Link Systems, Inc. 22 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Enter a Computer description and a Computer name (optional. ) Click Next. All computers on your network should have the same Workgroup name. Click Next. D-Link Systems, Inc. 23 DWL-700AP User's Manual Networking Basics (continued) Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. D-Link Systems, Inc. 24 DWL-700AP User's Manual Networking Basics Networking Basics (continued) In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. D-Link Systems, Inc. 25 DWL-700AP User's Manual Networking Basics (continued) Networking Basics Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next. D-Link Systems, Inc. 26 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. D-Link Systems, Inc. 27 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Naming your Computer To name your computer in Windows XP, please follow these directions: Click Start (in the lower left corner of the screen). Select Properties and click. Select the Computer Name Tab in the System Properties window. You may enter a Comput- er Description if you wish; this field is optional. To rename the computer and join a domain, Click Change. D-Link Systems, Inc. 28 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Naming your Computer In this window, enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK. Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP address range (see Getting Started in this manual for a definition of IP address range. ) To check on the IP address of the adapter, please do the following: Right-click on the Local Area Connection icon in the task bar. Click on Status. D-Link Systems, Inc. 29 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Checking the IP Address in Windows XP This window will appear. Click the Support tab. Click Close. Assigning a Static IP Address in Windows XP/2000 Note: Some gateways/broadband routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable gateway/router you will not need to assign static IP addresses. If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow these instructions: Go to Start. Double-click on Control Panel. D-Link Systems, Inc. 30 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections. Right-click on Local Area Connections. Double-click on Properties. D-Link Systems, Inc. 31 DWL-700AP User's Manual Networking Basics Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol (TCP/IP). Click Properties. In the window below, select Use the following IP address. Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192. 168. 0. 2, the other computers should have IP addresses that are sequential, like 192. 168. 0. 3 and 192. 168. 0. 4. The subnet mask must be the same for all the computers on the network. ) IP Address: e. g. , 192. 168. 0. 2 Subnet Mask: 255. 255. 255. 0 Default Gateway: Enter the LAN IP address of the wireless router. (D-Link wireless routers have a LAN IP address of 192. 168. 0. 1) Select Use the following DNS server address. Enter the LAN IP address of the wireless router. (D-Link wireless routers have a LAN IP address of 192. 168. 0. 1) Click OK. You have completed the assignment of a static IP address. [. . . ] Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. [. . . ]