User manual D-LINK DAP-2310

[. . . ] 76 D-Link DAP-2310 User Manual 3 Section 1 - Product Overview Product Overview Package Contents • D-Link DAP-2310 AirPremier® N Access Point • Power Adapter • CAT5 Ethernet Cable • CD-ROM with User Manual • Install Guide Note: Using a power supply with a different voltage rating than the one included with the DAP-2310 will cause damage and void the warranty for this product. System Requirements • Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter • For configuration, the following web browsers are supported: • Microsoft® Internet Explorer® 6. 11n AP increases productivity by allowing you to work faster and more efficiently. With the DAP2310, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are now able to move across the network quickly. [. . . ] Select from the 1st to 4th key to be set as the active key. You will select one of these keys in the Key Index drop-down menu. When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended. When you select WPA-Personal, please enter a PassPhrase in the corresponding field. When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item in the corresponding field. When you select WPA-Enterprise, enter the IP address of the RADIUS server. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/ Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2310 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status: Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. vLAN D-Link DAP-2310 User Manual 34 Section 3 - Configuration Port List The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE 802. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. The name of the port is displayed in this column. The Tagged VID is displayed in this column. The Untagged VID is displayed in this column. [. . . ] With the access point powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. When logging in, the username is admin and leave the password box empty. [. . . ]