User manual D-LINK DCS-950G

[. . . ] DCS-950G User's Manual Table of Contents Table Of Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The D-Link DI-624 is used as an example to clarify the configuration process. Your WAN Ip Address information will be listed on following window. Determine Your Router's WAN IP Address Note: Because a dynamic WAN IP address can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location. You can use DDNS to obtain an IP address, please refer to page 34 for more information. D-Link Systems, Inc. 51 DCS-950G User's Manual Installing the DCS-950G Behind a Router Assigning and Opening Virtual Server Ports 4) Open Virtual Server Ports To Enable Remote Image Viewing The Virtual Server Ports of your router must be opened for remote access to your camera. This is also referred to as port forwarding. Please proceed as follows: ·Select Enabled to enable virtual server settings. ·Enter your camera's Local IP Address in the Private IP field. ·If you are using the default camera port settings, enter 80 in to the Public and Private Port section. ·Schedule should be set to Always so that the camera images can be accessed at any time. ·In the Virtual Servers List, a check mark appearing before the camera name will indicate that the ports are enabled. ·Click Apply to save your settings. Note: If you are installing multiple cameras, be sure to open ONE Web port per additional camera installed: port 81, 82, etc. The AV Control Port and AV Streaming Port also need to be opened. Each camera will also require different Control and Streaming ports (5002, 5003, . . . etc. ) D-Link Systems, Inc. 52 DCS-950G User's Manual Installing the DCS-950G Behind a Router Viewing Your Camera After all settings have been entered correctly, a user inside or outside your network will have access to the camera through a standard Web browser. To access from the Internet, simply type in the IP Address of the router given to you by your ISP, a colon, and the port number that you gave your camera. To access from a computer on your local (home) network, simply enter the local IP Address of your camera (i. e. If using a port other than port 80, you must enter the IP address followed by a colon and the assigned port number. http://205. 163. 122. 96:83 D-Link Systems, Inc. 53 DCS-950G User's Manual IPView Lite Application Installation IPView Lite Application Installation IPView Lite software is included for administrators to manage up to 4 DCS-950Gs remotely, record to hard drive, and configure advanced settings for the DCS-950G. IPView Lite is a complete software management tool for the DCS-950G and includes all configurable settings available in the Web configuration utility. Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown on below. Click Install Software. Click Install IPView Lite. D-Link Systems, Inc. 54 DCS-950G User's Manual Click Next. IPView Lite Application Installation Click Yes. Click Next. D-Link Systems, Inc. 55 DCS-950G User's Manual Click Next. IPView Lite Application Installation If your sound card or video card has not passed Windows Logo testing, this window will appear. Click Continue Anyway. If there are previously installed target files that are newer than the source files, do NOT overwrite them. [. . . ] THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. [. . . ]