User manual D-LINK DES-1026G

[. . . ] Switching Technology Switching is a cost-effective way of increasing the total network capacity available to users on a LAN. If an Ethernet network begins to display symptoms of congestion, low throughput, slow response times, and high rates of collision, installing a switch to an network can preserve much or all of the existing network's cabling and workstation interface card infrastructure while still greatly enhancing the throughput for users. A switch is a viable solution even if demanding applications, such as multimedia production and video conferencing, are on the horizon. The most promising techniques, as well as the best return on investment, could well consist of installing the right mixture of Ethernet switches. [. . . ] Then, use screws provided with the equipment rack to mount the Switch in the rack. Mount the Switch in the rack 9 Connecting Network Cable The DES-1026G supports 10/100/1000Mbps Gigabit Ethernet. It runs full/half duplex transfer mode for 10/100Mbps and full duplex transfer mode for 1000Mbps. Each port on the DES-1026G supports AutoMDI/MDI-X. Auto-MDI/MDI-X is a feature that eliminates the need for worrying about using either a standard or crossover cable--you can use either one--and allows any port to be an uplink port. AC Power The DES-1026G can be used with AC power supply 100~240V AC, 50~60 Hz. The power switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The switch's power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected. 10 4. General Technical Specifications IEEE 802. 3 10BASE-T Ethernet IEEE 802. 3u 100 BASE-TX Fast Ethernet IEEE 802. 3ab 1000BASE-T Gigabit Ethernet CSMA/CD Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit Ethernet: 2000Mbps (full duplex) Star 10BASET: 2-pair UTP/STP Cat. 3, 4, 5; up to 100m 100BASE-TX: 2-pair UTP/STP Cat. 5; up to 100m 1000BASE-T: 4-pair UTP/STP Cat. 5E is recommended) 24 ×10/100BASE-TX Auto-MDIX STP ports 2 × 1000BASE-T Auto-MDIX STP ports Standards Protocol Data Transfer Rate Topology Network Cables Number of Ports Physical and Environmental AC inputs 100 to 240V AC, 50/60 Hz internal universal power supply Power 11. 75 watts. (max. ) Consumption Temperature Operating: 0°~40°C, Storage: -10°~70°C Humidity Dimensions Emissions Safety Performance Transmits Method RAM Buffer Filtering Address + Table Packet Filtering/ Forwarding Rate MAC Address Learning Operating: 10%~90%, Storage: 5%~90% 440× 140× 44 mm (W × H × D) FCC Class A, CE Mark Class A, VCCI Class A CUL, LVD Store-and-forward 2. 5Mbits per device 8K entries per device 10Mbps Ethernet: 14, 880/pps 100Mbps Fast Ethernet: 148, 800/pps 1000Mbps Gigabit Ethernet: 1488, 000/pps Automatic update 11 5. Contacting Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. customers can contact D-Link technical support through our web site, or by phone. D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support. dlink. com When contacting technical support, please provide the following information: · · · Serial number of the unit Model number or product name Software type and version number 12 6. ("D-Link") provides this 5-Year Limited warranty for its product only to the person or entity that originally purchased the product from: · · D-Link or its authorized reseller or distributor. D-Link's sole obligation shall be to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional specifications for the Software or to refund at D-Link's sole discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Submitting A Claim: Any claim under this limited warranty must be submitted in writing before the end of the Warranty Period to an Authorized D-Link Service Office. [. . . ] All rights reserved. CE Mark Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. [. . . ]