User manual D-LINK DES-3526DC

[. . . ] User Manual Product Model: DES-3526 / DES-3526DC Layer 2 Managed Stackable Fast Ethernet Switch Release 3. 60 TM ©Copyright 2005. All Rights Reserved __________________________________________________________________________________ Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. [. . . ] The user may display all Access ID entries by clicking the View All Entry button. To create a new rule set for an access profile click the Add button. To remove a previously created rule, click the corresponding X button. Figure 6- 61. Access Rule Configuration window (IP) Configure the following Access Rule Configuration settings: Parameter Profile ID Mode Description This is the identifier number for this profile set. Select Permit to specify that the Switch, according to any additional rule, forward the packets that match the access profile added (see below). Select Deny to specify that packets that do not match the access profile are not forwarded by the Switch and will be filtered. Type in a unique identifier number for this access or use Auto Assign. 82 Access ID (1-65535) xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual Type Selected profile based on Ethernet (MAC Address), IP address or Packet Content Mask. · Ethernet instructs the Switch to examine the layer 2 part of each packet header. · IP instructs the Switch to examine the IP address in each frame's header. · Packet Content Mask instructs the Switch to examine the packet header This parameter is specified if you want to re-write the 802. 1p default priority previously set in the Switch, which is used to determine the CoS queue to which packets are forwarded to. Once this field is specified, packets accepted by the Switch that match this priority are forwarded to the CoS queue specified previously by the user. Replace Priority with - Click the corresponding box if you want to re-write the 802. 1p default priority of a packet to the value entered in the Priority (0-7) field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802. 1p user priority re-written to its original value before being forwarded by the Switch. For more information on priority queues, CoS queues and mapping for 802. 1p, see the QoS section of this manual. Priority (0-7) Replace DSCP (0-63) VLAN Name Source IP Destination IP DSCP (0-63) Select this option to instruct the Switch to replace the DSCP value (in a packet that meets the selected criteria) with the value entered in the adjacent field. Allows the entry of a name for a previously configured VLAN. Source IP Address - Enter an IP Address mask for the source IP address. Destination IP Address - Enter an IP Address mask for the destination IP address. This field allows the user to enter a DSCP value in the space provided, which will instruct the Switch to examine the DiffServ Code part of each packet header and use this as the, or part of the criterion for forwarding. The user may choose a value between 0 and 63. This field allows the user to modify the protocol used to configure the Access Rule Table; depending on which protocol the user has chosen, or configured in the Access Profile Table. Enter the switch port number(s) to which you wish this rule to apply. [. . . ] http://www. dlink. fi Sähköpostin kautta voit myös tehdä kyselyitä. Teknisk Support På vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation. D-Link tillhandahåller teknisk support till kunder i Sverige under hela garantitiden för denna produkt. Teknisk Support för kunder i Sverige: D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08. 00-20. 00 D-Link Teknisk Support via Internet: http://www. dlink. se Ver 1. 00 International Offices U. S. A 17595 Mt. 92708 TEL: 714-885-6000 Fax 866-743-4905 URL: www. dlink. com Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1-905-8295223 URL: www. dlink. ca Europe (U. K. ) 4th Floor, Merit House Edgware Road, Colindale London NW9 5AB U. K. [. . . ]