User manual D-LINK DFL-700 SECURIGATE

[. . . ] D-Link DFL-700 TM Network Security Firewall Manual Building Networks for People (20031225) Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features and Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Introduction to Firewalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Introduction to Local Area Networking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The upside to this is that the password does not have to be stored in plaintext in the RADIUS server. The DFL700 uses a shared secret when connecting to the RADIUS server. The shared secret enables basic encryption of the user password when the RADIUS-packet is transmitted from the firewall to the RADIUS server. The shared secret is case sensitive, can contain up to 100 characters, and must be typed exactly the same on both the firewall and the RADIUS server. Enable User Authentication via HTTP / HTTPS Follow these Authentication. Enable the checkbox for User Authentication. Specify if HTTP and HTTPS or only HTTPS should be used for the login. Specify the idle-timeout, the time a user can be idle before being logged out by the firewall. Choose new ports for the management WebUI to listen on as the user authentication will use the same ports as the management WebUI is using. . Click the Apply button below to apply the setting or click Cancel to discard changes. Enable RADIUS Support Follow these steps to enable RADIUS support. Specified which mode to use, PAP or CHAP. Specify the shared secret for this connection. Click the Apply button below to apply the setting or click Cancel to discard changes. 38 Add User Follow these steps to add a new user. Click on add after the type of user you would like to add, Admin or Read-only. Fill in User name; make sure you are not trying to add one that already exists. Specified what groups the user should be a member of. Specify the password for the new user. Click the Apply button below to apply the setting or click Cancel to discard changes. Note: The user name and password should be at least six characters long. The user name and password can contain numbers (0-9) and upper and lower case letters (A-Z, az). Special characters and spaces are not allowed. Change User Password To change the password of a user click on the user name and you will see the following screen. Follow these steps to change a users password. Click on the user you would like to change level of. Enter the new password twice. Click the Apply button below to apply the setting or click Cancel to discard changes. Note: The password should be at least six characters long. The password can contain numbers (0-9) and upper and lower case letters (A-Z, a-z). [. . . ] Im Wohnbereich kann dieses Produkt Funkstoerungen verursachen. In diesem Fall kann vom Benutzer verlangt werden, angemessene Massnahmen zu ergreifen. Advertencia de Marca de la CE Este es un producto de Clase B. En un entorno doméstico, puede causar interferencias de radio, en cuyo case, puede requerirse al usuario para que adopte las medidas adecuadas. [. . . ]