User manual D-LINK DHP-P501AV

[. . . ] The Powerline link rate is less than 50 Mbps. The Ethernet port is linked but there is no data traffic. D-Link DHP-P500AV/DHP-P501AV User Manual 5 Section 1 - Product Overview EU type Hardware Overview Connection Passthrough Power Socket Rating: 250V/16A maximum Please do not plug devices into the power socket that exceed the product rating. Reset Button Press and hold the button for 1 second to reset to factory default. [. . . ] First Adapter Press Simple connect button of the first adapter for no more than three seconds. The Power LED will start blinking after you release the button. The adapter will create a private, randomly generated encryption key that each Powerline AV 500 passthrough network adapter will use. Second Adapter Within two minutes of pushing the Simple connect button of the first adapter, press Simple connect button of second adapter in your Powerline network for no more than three seconds. The Power LED will start blinking after you release the button. D-Link DHP-P500AV/DHP-P501AV User Manual 12 Section 2 - Installation Note: Both Simple connect buttons must be pressed within two minutes. Second Adapter After above network security setup steps, your Powerline network will be securely configured with the same network encryption key. The adapters will memorize the security settings even if they are unplugged. Note: To change the private encryption key, please reset the adapter back to its default value by pressing the Reset button for 1 second and then follow the security setup procedure above. Adding More Adapters If you would like to add more than two adapters, press the button of the additional adapter for no more than three seconds. The Power LED will start blinking after you release the button. Then press the button of any adapter in your existing Powerline network for no more than two seconds. The Power LED will start blinking after you release the button. Note: Both Simple connect buttons must be pressed within two minutes. After above network security setup steps, your Powerline network will be securely configured with the same network encryption key. D-Link DHP-P500AV/DHP-P501AV User Manual 13 Section 2 - Installation Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DHP-P500AV CD into your CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Start > Run. In the Run command box type “D:\autorun. Exe”, where D: represents the drive letter of your CD-ROM. If it does start, proceed to the next screen. Click on Install Utility D-Link DHP-P500AV/DHP-P501AV User Manual 14 Section 3 - Configuration Configuration After you have completed the D-Link Powerline AV Utility installation wizard, double-click the D-Link Powerline AV Utility icon on your desktop to start the configuration of the DHP-P500AV. [. . . ] You can use Powerline Utility to set all devices within existing Powerline network and the new device back to the default encryption key first. Then follow the 1 to 4 steps of “Setting your private Encryption Key”. Your Powerline network will securely be configured with a customized encryption key and all devices can communicate with each other after your setting. D-Link DHP-P500AV/DHP-P501AV User Manual 19 Section 4 - Security PowerLine Installation Considerations Plan the location of your PowerLine devices: 1. [. . . ]