User manual D-LINK DI-624M

[. . . ] DI-624M User's Manual Table of Contents Table of Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If not, check that the AC power and Ethernet cables are firmly connected. Check that the IP Address, subnet mask, gateway and DNS settings are correctly entered for the network. If you are using 2. 4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your DI-624M, and on all the devices in your network to avoid interference. Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, Monitors, electric motors, etc. D-Link Systems, Inc. 51 DI-624M User's Manual 7. I forgot my encryption key. Troubleshooting Reset the DI-624M to its factory default settings and restore the other devices on your network to their default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current configuration settings. Resetting the DI-624M to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-624M to the factory default settings. Remember that D-Link Super G MIMO products network together, out of the box, at the factory default settings. Reset Button To hard-reset the DI-624M to Factory Default Settings, please do the following: Locate the Reset button on the back of the DI-624M. Use a paper clip to press the Reset button. Hold for about 10 seconds and then release. After the DI-62M reboots (this may take a few minutes) it will be reset to the factory Default settings. D-Link Systems, Inc. 52 DI-624M User's Manual Technical Specifications Technical Specifications Standards IEEE 802. 11g IEEE 802. 11b IEEE 802. 3 IEEE 802. 3u VPN Pass Through/ Multi-Sessions PPTP L2TP IPSec Device Management Web-Based- Internet Explorer v6 or later; Netscape Navigator v7 or later; or other Java-enabled browsers DHCP Server and Client Advanced Firewall Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling Wireless Operating Range Indoors ­ up to 328 feet (100 meters) Outdoors ­ up to 1312 feet (400 meters) Operating Temperature 32ºF to 131ºF (0ºC to 55ºC) Humidity: 95% maximum (non-condensing) Safety and Emissions: FCC Wireless Frequency Range: 2. 4GHz to 2. 462GHz D-Link Systems, Inc. 53 DI-624M User's Manual LEDs: Power WAN LAN (10/100) WLAN (Wireless Connection) Physical Dimensions: L = 7. 56 inches (192mm) W = 4. 65 inches (118mm) H = 1. 22 inches (31mm) Wireless Transmit Power: 15dBm ± 2dB Security: Technical Specifications WPA- WiFi Protected Access (64-, 128-WEP with TKIP, MIC, IV Expansion, Shared Key Authentication) External Antenna Type: Dual non-detachable antennas Modulation Technology: Orthogonal Frequency Division Multiplexing (OFDM) Power Input: Ext. Power Supply DC 5V, 2. 5A Weight: 10. 8 oz. (0. 3kg) Warranty: 1 year Wireless Data Rates* with Automatic Fallback: 108 Mbps 54 Mbps 48 Mbps 36 Mbps 24 Mbps 18 Mbps 12 Mbps 11 Mbps D-Link Systems, Inc. 54 DI-624M User's Manual 9 Mbps 6 Mbps 5. 5 Mbps 2 Mbps 1 Mbps Receiver Sensitivity: 108Mbps 54Mbps OFDM, 10% PER, -71dBm 48Mbps OFDM, 10% PER, -71dBm 36Mbps OFDM, 10% PER, -78dBm 24Mbps OFDM, 10% PER, -82dBm 18Mbps OFDM, 10% PER, -85dBm 12Mbps OFDM, 10% PER, -87dBm 11Mbps CCK, 8% PER, -85dBm 9Mbps OFDM, 10% PER, -90dBm 6Mbps OFDM, 10% PER, -91dBm 5. 5Mbps CCK, 8% PER, -88dBm 2Mbps QPSK, 8% PER, -89dBm 1Mbps BPSK, 8% PER, -92dBm Technical Specifications *Maximum wireless signal rate derived from IEEE Standard 802. 11g specifications. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. D-Link Systems, Inc. 55 DI-624M User's Manual Frequently Asked Questions Frequently Asked Questions 1 Why can´t I access the Web based configuration? When entering the IP Address of the DI-624M (192. 168. 0. 1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. To resolve difficulties accessing a Web utility, please follow the steps below. Step 1: Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. [. . . ] Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. [. . . ]